2GIG Wireless Passive Infrared Motion Detector
Product Description
The Passive Infrared Motion Detector is a wall-mounted unit with wide angle motion protection. When set to High Sensitivity Mode, the Passive Infrared Motion Detector (PIR) has a maximum range of 30 feet deep x 50 feet wide. The PIR is pet immune up to 55 lbs.
- Dual element sensor with 30' by 50' range
- 55 lb. pet immune
- 90 degree look down
- Lithium battery
- Transmits 345 MHz
- ETL Listed
In The Box:
- PIR Motion Detector
- 3V Lithium battery
- 3 x Screws
- 2 x Dowels
- Bracket
- Flat wall mount
- Corner mount
Tech Specs
- Part Number: 2GIG-PIR1-345
- Wireless Signal Range: 350 feet, open air, with 2GIG Wireless Control Panel
- Code Outputs: Alarm; Alarm Restore; Tamper; Tamper Restore; Supervisory; Low Battery
- Transmitter Frequency: 345.000 MHz (crystal controlled)
- Transmitter Frequency Tolerance: ±15kHz
- Transmitter Bandwidth: 24kHz
- Modulation Type: Amplitude Shift Keying-On/Off Keying (ASK-OOK)
- Unique ID Codes: Over one million different code combinations
- Supervisory Interval: 70 minutes
- Peak Field Strength: Typical 50,000 uV/m at 3m
- Sensor Type: Quad element
- Pet Immunity: Selectable – 15 kg (33 lbs) or 25 kg (55 lbs; default)
- Sensitivity Jumper: Selectable – High or Low (default)
- Suggested Mounting Height: 7.5 feet (2.3 m)
- Sensor Range: 30 x 50 feet (9.1 x 15.2 m)
- Max. Horizontal Sensing Angle: 90 degrees
- Dimensions: 3.2(L) x 2.5(W) x 1.9(H) inches (8.12 x 6.35 x 4.82 cm)
- Weight: 3.7 ounces (104.9 g)
- Housing Material: ABS plastic and polycarbonate
- Color: White
- Operating Temperature: 32° to 120° F (0° to 49° C)
- Relative Humidity: 5 to 95 percent Non-Condensing
- Battery: One (1) Panasonic CR123A or equivalent Lithium battery (included)
- Regulatory Listings: ETL, FCC Part 15, Industry Canada
- Included Accessories: Mounting brackets, 2 long Phillip's head screws, 2 plastic wall anchors
- Warranty: 2-Year Limited