2GIG Panic Button Remote
Product Description
Invest in a panic button by 2GIG in case of emergency, This small and lightweight remote is essential to your home security.
- For triggering emergency alarm
- Small and lightweight
- 5-second button lockout
- Lithium battery
- Transmits 345 MHz
- ETL Listed
The Panic Button Remote was designed to transmit an emergency signal from any location within the range of the alarm system. Signals from the button are transmitted whether the system is armed or disarmed. The panic button remote is small and lightweight enough to be placed in a shirt pocket or tucked away inside a purse. It can also be used with the supplied wristband, lanyard, car-visor clip, or belt clip. It can also be permanently mounted to a convenient location. To activate, press and hold the button for approximately 2 seconds. The LED located on the top of the unit light ups for approximately 1 second to confirm a signal has been sent.
In The Box:
- Lanyard
- Sensor
- Battery
- Multi-functional clip
- Wall mount
Tech Specs
- Part Number: 2GIG-PANIC1-345
- Wireless Signal Range: 350 feet, open air, with 2GIG Wireless Control Panel
- Code Outputs: Alarm; Supervisory; Low Battery
- Transmitter Frequency: 345.000 MHz (crystal controlled)
- Transmitter Frequency Tolerance: ±15kHz
- Transmitter Bandwidth: 24kHz
- Modulation Type: Amplitude Shift Keying-On/Off Keying (ASK-OOK)
- Unique ID Codes: Over one million different code combinations
- Supervisory Interval: 70 minutes
- Peak Field Strength: Typical 36,000 uV/m at 3m
- Dimensions: 1.65(L) x 1.20(W) x 0.50(H) inches (4.19 x 3.05 x 1.27 cm)
- Weight: 0.45 ounces (12.8 g)
- Housing Material: ABS plastic
- Color: White with gray button
- Operating Temperature: 32° to 120° F (0° to 49° C)
- Relative Humidity: 5 to 95 percent Non-Condensing
- Battery: One (1) Panasonic CR123A or equivalent Lithium battery (included)
- Regulatory Listings: ETL, FCC Part 15, Industry Canada
- Warranty: 2-Year Limited