|
|
| ChannelPlus High-Headroom RF Distribution Amplifier with 5V IR
|
|
|
|
|
Product Details
High-headroom RF Distribution Amplifier with 5-volt IR
The Model DA-8200HHR High-headroom RF Distribution Amplifier with 5-volt IR is the heart of a
multi-room distribution system with outputs to eight televisions with coax runs up to 150
feet. The Model DA-8200HHR has three inputs, one from off-air antenna or CATV and two from
ChannelPlus 5400, 5500, or SVM series modulators. The DA-8200HHR is used with antenna
applications for off-air digital and NTSC signals.
The Model DA-8200HHR can be
powered locally with its included power supply or remotely from up to 75 feet away by using
an in-wall power injector wall plate Model 2010 or any 5500 series or SVM series
modulator.
The Model DA-8200HHR features optional IR control of connected video
sources and whole house IR integration with a built-in 5-volt IR engine. Model 2133 set-top
IR targets connect between the amplifier outputs and the television sets. IR emitters
connected to the amplifier, or to a 5500 or SVM series IR enabled modulator connected to the
amplifier, will repeat the IR remote control signals back to the video source
component.
Features:
• 54 MHz to 1 GHz forward bandwidth
• 3 dB nominal gain on TV outputs
• Maximum input
level 20 dBmv
• Can be used in locations without electrical access and powered remotely
with a ChannelPlus modulator or the Model 2010 wall plate
• 6.5" W x 1.25" H x 4.5 D"
Purchase the High-headroom RF Distribution Amplifier with 5-volt IR (MMPDA8200HHR) and you are guaranteed to save.
Find thousands of home automation products at the guaranteed lowest price, only at DiscountHomeAutomation.com
|
|
|
|
|
|
