|
|
| ChannelPlus J-Box In-Wall IR Receiver with LED
|
|
|
|
|
Product Details
In-Wall IR Target
The Model 2131 12-volt In-wall IR Target with Talk Back LED is a J-box IR target that
connects to the Model 2100A In-wall IR Interface through three wires. When IR remote control
signals are received by the target, they are inserted by the Model 2100A into the coax cable
and sent back to the video hub. IR emitters connected to the video hub, or to a 5500 series
IR enabled modulator connected to the video hub, will repeat the IR remote control signals
back to the video source component. For visual feedback to the user, the red "talk back" LED
in the IR target will flash as IR remote control signals are received.
Not for use
with 5-volt IR systems. The Model 2100A interface must be used at all target locations.
Cable requirements for long lengths: three-conductor/24 gauge wire up to 200', 22 gauge up to
600', 20 gauge up to 2000' and 18 gauge up to 5000' (unshielded
OK).
Features:
• Three-wire connection to Model 2100A interface
• Red "talk back" LED tests system for correct wiring as well as indicating infrared
reception
• J-box mounting
• Fits Decora® style wall plates
• Includes dark lens for decorator-style wall plate
• Nominal reception angle: 45 degrees off axis
• Nominal reception range: > 25 feet
• Maximum cable length: One mile with 18 gauge
• 1.3" W x 4.0" H x 2.2" D
Purchase the In-Wall IR Target (MMP2131) and you are guaranteed to save.
Find thousands of home automation products at the guaranteed lowest price, only at DiscountHomeAutomation.com
|
|
|
|
|
|
