Contents

• 1 - Auto Dialer
• 2 - RF PIR Sensors
• 2 - RF Keyfob
• 1 - 12V DC Adaptor
• 1 - Installation & Programming Guide
• 1 - Telephone Cable
• 1 - Back-up Battery

The AD-01 is a simple do-it-yourself security dialer that uses your existing telephone line to send a message when an alarm is generated. When an alarm is caused by one of the wireless or hard wired sensors the dialer will call out and play one of two ten second messages that you record yourself. You can program up to nine different telephone numbers for the dialer to call. There is an entrance and exit delay as well as a local alarm. The dialer can be armed and disarmed with the wireless key fob. The dialer can be triggered by wireless PIR sensors, shock sensors or door contacts. It can also be triggered by any hard wired sensor you may wish to use. The back-up battery allows the dialer to operate for 12 to 24 hours without AC power. This is a good option for home owners who want a security system but do not want to pay a monthly monitoring fee.

The passive infrared (PIR) detector operates on a 9 volt battery and will detect motion to a distance of about 40 ft. in front of the sensor. The PIR will then send a radio signal up to 200 ft. back to the auto dialer.

The wireless key fob can be used to arm and disarm the auto dialer from a distance of about 200 ft. The key fob can also be used as a panic alarm.