ELK 2-Way Wireless Glass Break Sensor
Product Description
The ELK-6040 Wireless Glass Break Sensor is designed for use with Elk's two-way wireless product line consisting of the ELK-M1XRFTW Transceiver and the ELK-M1 Control.
The 6040 listens for actual patterns of breaking glass across the full audio band using Pattern Recognition Technology. The factory set recognition patterns make it possible to detect the difference between breaking glass of framed perimeter windows in a building vs. a drinking glass breaking within a room.
Features:
- Pattern Recognition Technology
- Wireless two-way communication
- Operation Alarm LED – RED (viewable from front)
- RF Acknowledge LED – Bi-Color (viewable with cover off)
- Long life Lithium battery {supplied}
- Low battery trouble signal
In The Box:
- 6040 Wireless Glass Break sensor
- CR123A Lithium Battery
- Mounting Screws and Anchors
- Installation Guide
Tech Specs
- Dimensions: 4.25(W) x 3.13(H) x 1.70(D) inches
- Sensor: Omni-directional Microphone, 360-degree Detection Range
- Detection Range: 20 feet (6m) x 360 degrees
- Min. Distance from Glass: 4 feet (1.2m)
- Glass Thickness:
- Plate: 3/32 to 1/4 inch (2.4 to 6.4mm)
- Tempered: 1/8 to 1/4 inch (3.2 to 6.4mm)
- Wired: 1/4 inch (6.4mm)
- Laminated: 1/8 to 1/4 inch (3.2 to 6.4mm)
- Power: One CR123 3.0 VDC Lithium Bttery
- Typical Battery Life: 5 years
- Quiescent Current: 25 µA (typically)
- RF Frequency: 902 to 928 Mhz channel hopping
- Supervisory Check-In Interval: ~64 minutes
- Storage Temperature: -4 to 140°F (-20 to 60°C)
- Operating Environment: 32° to 120°F (0 to 49°C)
- Relative Humidity: 93 percent RH (max.), non-condensing
- Approvals: FCC, IC