Global Caché Flex Link Relay Cable (Contact Closure)
Product Description
The Flex Link Relay and Sensor cable is an input/output cable for use with the iTach Flex. It provides relay outputs and sensor inputs to control and monitor the status of electronic devices using relay, contact closure, and current/voltage sensing. External devices are connected via push-release terminal blocks. The enclosure can be mounted directly on a DIN rail, allowing for simple integration with external relays.
- Four configurable relay outputs; four configurable sensor inputs.
- Outputs: Configurable as contact closure relay/SPST, SPDT, DPDT.
- Inputs: Configurable as contact or current/voltage sensing.
- Configurable/controllable from setup web page.
- Din rail mountable.
- No power supply required.
- Cable/Connector: 4.5 feet, 3.5 mm plug connects to Flex Link Port.
The relay outputs are fully-configurable to operate as a number of different standard relay types, and are capable of controlling a wide range of devices. The sensor inputs are configurable to allow detection of contact closure, as well as AC and DC voltage.
Available for sale only in the U.S.
Tech Specs
- Part Number: FLC-RS
- Setup: Configurable using hardware jumpers and through iTach Flex integrated web server or software API
- Relay Outputs: 4 Integrated SPST relays with transient voltage suppression and easy push release terminal blocks; 24V AC/DC or 0.5A N.O. contact relays; Allows for isolated switching of low voltage wiring.
- Relay Configurations: Relay outputs are configurable into common relay types: Single Pole Single Throw (SPST); Single Pole Double Throw (SPDT); Double Pole Double Throw (DPDT)
- Sensor Inputs: 4 configurable inputs; Voltage or contact closure sense modes.
- Voltage Sense Mode: Sense AC/DC voltages ±3V (RMS) to ±24V (RMS)
- Contact Closure Mode: Sense contact closure; Use for input from devices or feedback from external relays.
- Cable/Connector: 3.5mm four conductor jack to Flex Link Port on iTach Flex devices; 4 easy push four terminal blocks for relay and sensor connections; 4.5-foot cable; No power supply required
- Relay Rating:
- Max. Voltage: 24V
- Max. Current: 500mA
- Input Voltage AC/DC:
- Min: ±3V (RMS)*
- Max: ±24V (RMS)
- Input Current: Min: 200µA
- Input High to Low Response:
- Min: 1.5ms**
- Max: 3ms**
- Input Low to High Response:
- Min: 110ms**
- Max: 250ms**
- Contact Closure Detection Source Current: Max: 2mA
- Mounting: Enclosure is DIN rail mountable; Allows for simple installation in any location.
- Dimensions: 3.24(W) x 2.0(L) x 0.9(H) inches
- Warranty: 2-Year Limited