Some applications may call for only one room to be automated for lighting. This bundle provides just the solution for a limited automated lighting application. With two Dimmer Switches and two Lamp Modules, a variety of lighting can be controlled and programmed. Control multiple lights via the Scene Switch which can be set to alter several light sources with the push of a single button. 110VAC only.

INCLUDED WITH PACKAGE

• 35A00-1: 600W UPB Dimmer Switches (2) - Used for controlling and dimming lighting loads up to 600 watts. Includes a white paddle, connectors, instructions. Uses standard Decora wallplate (not included).
• 59A00-1: UPB Lamp Modules (2) - The HAI UPB Lamp Module (Figure 1) is a plug-in dimmer that incorporates the UPB two-way powerline communication technology, which gives it the ability to be remotely controlled by UPB compatible controllers. The Lamp Module has one UPB controllable outlet that can sense the lamp's local on/off switch to turn the lamp on even after it was turned off using UPB control. The HAI UPB Lamp Module is also capable of transmitting UPB messages (including current light level) when the local lamp switch is used to turn the lamp on. Each lamp module can be configured to custom fit an individual's lifestyle and desires.
• 39A00-2: UPB Split Phase Repeater (1) - Designed to repeat UPB signal in installations requiring additional signal strength. Must be used on a 120/240VAC split-phase 60Hz powerline.
• 38A00-1: Scene Switch, 6-Button (1) - Control all lights in a room or area. Lights may be turned on or off, dimmed, brightened, and set to four different scenes. Setting a scene is as simple as pressing the scene button on the Scene Switch five times. Has infrared receiver for use with Scene Switch Remote Control. Includes White bezel, connectors, instructions.
• 38A15-WH: Table Top Scene Switch Cradles, White (1) - The Table Top Scene Switch Cradle is used to table mount the Scene Switch (38A00-1), House Status Switch (38A00-2), or Lumina Mode Switch (38A00-3). The Table Top Scene Switch Cradle can be conveniently located throughout the home, including on a bedside nightstand, on the desk in a home office, or next to your favorite chair. It plugs directly into electrical outlet and has a cord length of 6 feet.
• 38A14-1: Scene Switch Remote (1) - Works with HAI's Scene Switch. Controls all lights in a room or area. White color.