|
|
| HomeSeer Z-Wave Multi-Sensor
|
|
|
|
|
Product Details
Homeseer Z-Wave Multi-Sensor
- Includes Motion, Temperature, and Luminance Sensors
- Battery Operated
- May be used with HomeSeer to trigger events based on any combination of sensor data (see details below)
HSHSM100™ a new HomeSeer Z-Wave® device featuring three-sensors-in-one! HSHSM100 is primarily intended as a motion sensor and is supported as a motion sensor by all Z-Wave certified systems. However, HSHSM100 can also function as a temperature sensor and light sensor when used with any HomeSeer system! Use it to control Z-Wave devices directly or trigger HomeSeer automation events for whole house control of Z-Wave and non Z-Wave automation products.
Motion Sensor
The sensitivity of the HSHSM100 motion sensor is fully adjustable, allowing pet owners to tweak the unit for best performance without false positives. The unit has a range of 30 feet and the sensor angle of view is 90° (horizontal). For best performance, mount the unit flush against a wall at a height of 6-8 feet. It is not necessary to point the unit downward. An exposed side-mounted button allows for easy unit testing and setup and the default setup cycle (10 minutes) provides HomeSeer users and installers plenty of time to configure the unit. - Passive Infrared Sensor (PIR)
- 30 foot Range
- 90° Horizontal Angle Coverage
- Adjustable Sensitivity (for "pet friendly" operation)
- Programmable Timeout (for "no motion" detection)
- LED Motion Indicator
Luminance Sensor
The illumination sensor of HSHSM100 can be programmed to work in tandem with HomeSeer software and controllers to ensure greater lighting accuracy under a wide variety of conditions. Use it to light rooms before "sunset" on cloudy or overcast days. Use it to prevent "on" commands when sufficient natural light is already available. - Detects the amount of light in the room
- Lights stay off if there is sufficient natural light
Temperature Sensor
The temperature sensor of HSHSM100 can be used to adjust heating and cooling systems to keep the room comfortable. Use it also to monitor areas of concern where conventional thermostats are not installed. - 32° - 104°F (0° - 40°C) Range
- 0.2°F Resolution
Battery Level
In addition to sensing motion, light and temperature, the HSHSM100 also monitors its own battery condition. Use this feature with HomeSeer to trigger email, phone or text to speech alerts if the battery drops below a certain (user definable) point.
Z-Wave Wireless RF Communication - Advanced Mesh Network Protocol
- Includes 300 series Z-Wave chip
- 300 foot Range
- 40,000 bits/sec
- Adjustable WakeUp Notification
- Up to 4 Associated Z-Wave Nodes
- Z-Wave Certified
- FCC Approved
General
HSHSM100 is battery powered and needs no wires to operate. HSHSM100 can be wall mounted or simply placed on any flat surface. Battery lifetime typically exceeds one year but depends on the operating modes programmed. - Two piece wall mount enclosure or can be placed on a flat surface
- Battery Powered (3 AAA)
- 1 Year Battery Life
Specifications - 908.42 MHz Z-Wave frequency
- For indoor use only
Downloads (Manuals / User Guides / Software)
What's Included - HSHSM100 Sensor
- Installation Guide
Requirements - Works with any 908.42 MHz Z-Wave network
Purchase the Homeseer Z-Wave Multi-Sensor (HSHSM100) and you are guaranteed to save.
Find thousands of home automation products at the guaranteed lowest price, only at DiscountHomeAutomation.com
|
|
|
|
|
|
