Leviton ODC Multi-Technology Ceiling-Mount Occupancy Sensor
Product Description
The Occupancy Sensor is a LINE-voltage infrared sensor to automatically control lighting. The sensor turns the lights ON and keeps them ON whenever occupancy is detected and will turn them OFF after the "delayed-off time" has expired. The sensor continually analyzes and adjusts to changing conditions. The sensor uses the latest microprocessor-based technology which permits it to continually adjust and optimize its performance. Infrared motion detection gives higher false triggering immunity that yields a sensor with excellent performance.
The Leviton ODC Series combines line voltage vacancy sensors into a self-contained unit. The integrated design alleviates the need for separate power pack and vacancy sensor wiring making it a low-cost, efficient energy solution for new construction and retrofits.
- Sensors combine both PIR and U/S technology for unrivaled performance and reliability. Sensors use PIR technology to initially turn lights ON, and use U/S technology to keep the lights ON. Exclusive false-detection software assures lights are ON only when needed.
- Auto-Adapting: Time delay and sensitivity are continually adjusted to occupancy pattern of use
- Configurable for Manual ON/Auto OFF or Auto ON/Auto OFF
- Delayed OFF Timer: The sensor will turn lights OFF if no motion is detected after a specified time
- Exclusive Walk-through Feature: Provides increased energy savings by not leaving the lights ON for an extended period after only momentary occupancy
- False Detection Timer: (M/T) The PIR scans for movement and shuts lights off after 31 minutes preventing false triggers from HVAC systems
- Time delay and saved settings are protected during power outages and will return to the last known state
- Output short circuit protection
- Industry-exclusive self-configuring local manual switch input: Momentary or maintained switches are supported
- Presentation Mode feature for slide or film presentations allows push buttons to turn lights OFF and keep them OFF while the room is occupied
- Adjustable Time Delay: 30s, 5min, 10min, 20min, 30min
- Test Mode for simplified commissioning
- Manual Switch and Emergency Override are Class 1 and Class 2 circuits. Class 2 circuits provided for flexibility
- Industry-exclusive "fail-safe" circuitry: In the event of product failure, Return-to-Closed feature causes the relay to default ON which eliminates life safety concerns
- Industry-exclusive H.I.S. (High Inrush Stability) technology designed to handle today's high inrush electronic ballast loads and offer unmatched durability and service
- Robust and reliable mechanically held 10A latching relay provides dependability and robust performance for all load types and provides energy savings over electronically held relays
- Lenses are easily replaceable and color-coded red (mid-range) and black (extended range) for contractors and end-users to easily identify lenses from the ground
- Red Visual LED indicator – Blinks when infrared is detecting motion and during photocell manual calibration; solid during device malfunction
- Green Visual LED indicator – Blinks when U/S is detected; solid during auto calibration
- Yellow Visual LED indicator – Blinks during test mode; solid with emergency/BMS input
In The Box:
- 1 x Sensor
- 1 x Mid-Range Lens
- 1 x 360° Perforated Mask
- 1 x 4" x 4" Mounting Plate
- 1 x Emergency Label
- 1 x Low Voltage Connector
- 2 x #6-32 x 1-1/2" Screw
- 1 x Half Mask
- 1 x Tubing Barrier
- 1 x Light Pipes
Tech Specs
- Technology: Multi-Technology PIR/Ultrasonic
- Line Voltage: Yes
- Mount: Ceiling
- Adjustment: Self-Adjusting
- Pattern Degrees: 180
- Grade: Commercial
- Color: White
- Title 24 Compliant: Yes
Electrical
- Input Voltage: 120V, 50/60Hz; 230V, 50Hz; 277V, 50/60Hz
- Load Rating:
- 120V Input: 8A, Electronic Ballast, 800W/VA, Tungsten, Ballast, 1/4 HP Motor
- 230V Input: 6A/6AX, Electronic Ballast, Magnetic Ballast, 1/3 HP Motor
- 277V Input: 5A, Electronic Ballast, 1200VA, 1/3 HP Motor
- Current Consumption: 60-30 mA
Environmental
- Operating Temperature: 32° to 104° F (0° to 40° C)
- Storage Temperature: -15° to 160° F (-26° to 71° C)
- Relative Humidity: 0% to 90% non-condensing
Other
- Listings: CA Title 20 Compliant, UL 773A (Occupancy Standard), UL 924 (Emergency Equipment), cUL Listed, CE Compliant, NOM Certified, RoHS Compliant, NY LLC 48 Compliant
- Warranty: 5 Years Limited