Security should be more than just protection...it should be peace of mind as well. The iVision achieves both by giving you the ability to not only know when somebody is outside your home, but to view and talk to them from the safety and comfort of any location in the house.

Kit Includes

• 1 Camera Door Unit
• 1 Indoor Portable LCD Display Unit
• 1 Charging Cradle
• 1 AC Adapter
• 1 Rechargeable Battery Pack
• 4 Mounting Screws

Features

• 500 ft. transmission range, line of sight
• Two-way intercom
• 2.25 inch LCD color monitor
• Live browsing feature when door/camera unit is hardwired
• System can store up to 163 images
• Day/Night Operation
• Rechargeable battery pack and charging cradle included

Camera Unit Specifications

• Field Application: Outdoor & Indoor
• Operating Temperature : -4 deg F to 122 deg F
• Storage Temperature: -4 deg F to 158 deg F
• Operating Humidity ( max. ): max 90% RH
• Mounting Height: 59 inches typical
• Product Dimension: 5.23 in (H) X 3.84 in( W) X 1.48 in ( D )
• Product color: Metal Gray
• Product finishing: High gloss polish & paint
• Power input:
  • Battery powered, 6x AA size Lithium battery. Battery life time : 12 months for 1 event per day with 10 seconds talking duration per event.
  • External power: 8~16VAC
• Battery Low Indication: Low Battery Indication below 3.9V to 3.6V
• Standby current: < 80uA at full battery capacity, @ 77 deg F
• Max Talk current at day: < 270mA at full battery capacity @ Rx 75dB, 77 deg F
• Max Talk current at night: < 340mA at full battery capacity @ Rx 75dB, 77 deg F
• Max DingDong sound current at day: < 320mA at full battery capacity, @ 77 deg F
• Max DingDong sound current at night: < 380mA at full battery capacity, @ 77 deg F
• Communication: 2.4GHz Digital 1 way video and 2 way audio
• Effective communication range: 330 Feet line of sight
• Pairing: Pairing button on back of unit
• Video ability: Max. 15 Frames/ sec. QVGA
• IP rating: IPX4
• 2.4GHz module
  • Frequency Band: 2410 ~ 2470MHz (31Ch/2Mhz)
  • Modulation: GFSK
  • Sensitivity: ~ -85dBm @ 2Mbps, BER=1/1000
  • Output Power: Less than 100mW
• Camera & Lens
  • Image sensor: CMOS, Color VGA resolution (640x480)
  • Image format: 1/4"
  • Field of View: 68 degree
  • Side view: 46 degree
  • Top view: 59 degree
  • Focal length: 3.6mm
  • TV Distortion: < 0.65%
  • F. No: F 2.8
  • Pan/Tilt: Pan: ~15 deg L/R, Tilt up: ~15 deg Up
  • Image color at night: B/W
• Target Light Source
  • Light Source: IR LED X 2
  • Target distance: 6.5 Feet
  • Night level Lux: 5~15 Lux
• Audio output
  • Answering call duration: 10 seconds of live video, then returns to battery saving mode
  • Effective volume(DingDong): Indication tone 75dB @ 1.6 Feet
• Microphone
  • Directivity: Omni-directional
  • Effective detection range: 1 Foot typical for 75dB
• Indications
  • Low Battery Power: Alert sent to LCD (receiver) unit, low battery icon will display on screen as a RED outlined battery
  • Local Low battery indication: The LED located on the Transmitter will slowly blink continuously for more than 3 days
  • Push the Talk button: Ding Dong sound plus the LED lights for 1 second
• Pairing & Unpairing
  • Pairing: Momentary press the hidden button to enable pairing, Talk button LED blinking as indications ( 1Hz ). Once paired, Bi tone X 5 and live pictures 10 seconds as indication

Portable Indoor LCD Unit Specifications

• Field Application: Indoor
• Operating Temperature: 32 deg F to 104 deg F
• Storage Temperature: -4 deg F to 158 deg F
• Operating Humidity ( max. ): max 90% RH
• Product Dimension: 6.14 in ( H ) X 2.7 in ( W ) X 1.1 in ( D )
• Product color: Pearl white
• Product finishing: High gross polish
• Adaptor power input: AC100-240V, 50/60Hz, 6V/1A L Shape, FCC mark, Length = 6 ft, Color = White (To be running change to UL / FCC version)
• Battery Low Indication: Battery Low Indication below 3.8V to 3.5V
• Battery stand-by time (Removed from Cradle): >72 Hrs
• Standby current: < 6mA at full battery capacity @ 77 deg F
• Max Talk current: < 260mA at full battery capacity @ 77 deg F (1Khz/50mV MIC-input)
• Max DingDong sound current: < 300mA at full battery capacity @ 77 deg F
• Display Screen: 2.36" TFT LCD
• LCD Orientation: Landscape
• Video ability: Max. QVGA 15 frames/ sec.
• Calendar display: "2009-01-01 12:00 AM/PM"
• 2.4GHz module
  • Frequency Band: 2410 ~ 2470MHz (31Ch/2Mhz)
  • Modulation: GFSK
  • Sensitivity: ~ -85dBm @ 2Mbps, BER=1/1000
  • Output Power: Less than 100mW
• Battery
  • Type: Rechargeable battery
  • Size: AAA size Ni-MH X 3 (wrapped)
  • Nominal Capacity: 750mAH
  • Nominal Voltage: 3.6V
  • Charging duration: 6 hrs
  • Low battery indication of LCD unit: Red blank Low battery icon blinks on screen
  • Charging indications: Battery icon ( full ) blinking and charging LED On in charging, stay at full icon with charging LED off when fully charged
  • Capacity indication icon: Blank, 30%, 60% and Full total 4 indications
• Microphone
  • Specification: Same as Door/Camera door unit
• Audio output
  • Output volume: 75 dB/ 0.5m
  • Ring Tone volume adjustment: Press the Up or Down button to adjust the volume level while in standby, total 4 levels
  • Voice volume adjustment: Press the Up or Down button to adjust the volume level while in talking, total 4 levels
  • Chime sound: Ding dong sound
  • Key tone: A low level volume Bi tone as indication when access of the keys
• Functions
  • ANSWER: Accept the incoming call and Live browsing with talk
  • OFF: End the call or end the activities of Snapshot review, No. of snaps selection, calendar setting
  • PLAY: To playback the recorded snapshots or touch and stay for 3 seconds to start the calendar setting
  • DECREASE/DOWN:
    1) Decrease the voice volume while talking
    2) Decrease the ring tone volume in standby
    3) Decrease the number of snapshot setting
    4) Put back the calendar
    5) Scroll down the recorded snaps
  • INCREASE / UP:
    1) Increase the voice volume while talking
    2) Increase the ring tone volume in standby
    3) Increase the number of snapshot setting
    4) Advance the calendar
    5) Scroll up the recorded snaps
  • SNAP / No Of Snaps adj.: Push to take a snap while in talking or Touch and stay for 3 seconds while in standby to enter the No Of Snaps adjustment (Default : 2 pictures / talk, Selectable : 1 picture / talk, or 3 pictures / talk)
  • BROWSE: Push once while in standby to browse the camera, the time out duration is 60 seconds (Only for AC power)
  • BRIGHTNESS: Push to change the LCD image brightness level while in talking, playback or live browsing, 5 steps from dark to bright
  • Recorded image indication: With new image(s) is recorded the indication LED for Playback On 0.3s per 1.2S , to press the Playback key less than 2s to cancel the indication
  • POS demo:
    1) To press the "Off" button then the "Browse" for 5 seconds to enter or exit the Demo mode, Bi tone X 5 as indication.
    2) "DEMO" is appearing on the LCD screen also the MIC is disabled during the Demo mode.
  • To delete the stored images: To press the "Off" button then the "Snap" for 5 seconds to delete the stored images, Bi tone X 5 and "No Images" on screen as indication (A No image picture pops out for 10s as indication)
• Pairing & Unpairing
  • Pairing: Momentary press the hidden button to enable pairing, Talk button LED blinking as indications. Once paired, with Bi tone X 5 and live pictures 10 seconds as indication, time out duration is 30 seconds. (pairing time out duration: 30 seconds)
  • Pairing ability: 1 camera to 1 LCD unit

Charging Cradle Specifications

• Power Input: DC 6V (from AC adaptor 100~240VAC)
• Power Output: DC 6V
• Contact for charging cradle: Via 2 spring type contacts, adaptor should have short circuit protection to prevent abnormal short circuit
• Product color: Pearl white
• Product finishing: High gross polish
• Field application: Wall mount and table free standing
• Dimensions: 5.5 in (H) X 3.7 in (W) X 4.4 in (D)

Packaging & Accessories

• Color Box: YES (Color box, 4-color)
• Protection: Blister pack
• Product Label: 5 types
• Date code label: 1 each for LCD, Camera and Cradle
• Manual: 1 unit
• accessory pack PE Bag: 2 units
• Screw: 4 units x20mm
• Screw Peg: 4 units
• Charging cradle free standing: 1 unit
• Adaptor: 1 unit
• Battery: AAA Ni-MH Rechargeable Battery Pack

Compliance Standard / Directives

• RF Approbation: FCC
• UL: TBD
• RoHS: Yes