Features

• Performs 6 essential tests in the field:
  • Continuity Testing: Check the continuity of a circuit, wire run, or dry contact.
  • Voltage Testing: Check the voltage of power sources in the field without a multimeter.
  • Load Testing: Apply a simulated 1A or 500mA load to power sources to check the voltage under load.
  • Polarity Testing: Check polarity of wires using the illuminated power connector.
  • Voltage Drop Testing: Check the amount of voltage drop over long cable runs.
  • PTC Fuse Testing: Check the integrity of PTC fuses.
• Strength indication LEDs help test Load, Voltage, and PTC Fuses.
• Selectable load: 0.5A or 1A to test wiring depending on location, device to be tested, and anticipated voltage drop.
• Illuminated power connector: Clearly displays voltage polarity.
• Overheat indicator.

Specifications

• Operating voltage: 5 ~ 12 VDC
• Maximum load: 0.5 / 1 A (switch selectable)
• Power:
  • Continuity: 3VDC CR1220 Battery (included)
  • All other tests: Passive: No power required
• Dimensions: 2" X 13/4" X 11/8" (51 X 44 X 29 mm)

LED Voltage Indicator

• Blue: > 12VDC
• Green: 10.8~12 VDC
• Yellow: 10~10.7 VDC
• Red: < 9.9 VDC