Home
CLEARANCE
Gadget Central
Home Automation
Lighting Control
Home Theater
Security
Video Surveillance
Structured Wiring
Phones & Intercoms
Temperature Control
Window Control
Central Vacuums
Independent Living
OUR BRANDS
Use promo code SAVEPOSTAGE during checkout on orders over 100.00 for 7.99 flat rate ground shipping.  Some exclustions apply.
Seco-Larm Enforcer SK-1123-FQ, SK1123-SQ Access Control Keypad, Outdoor

Seco-Larm Enforcer Access Control Keypad, Outdoor

Part #: SESK1123xQ
Brand: Seco-Larm
  
Quantity
 

Beep Boop Your Way In

Just press a few keys from the outside to get to the other side.

FROM THE MANUFACTURER

Seco-Larm Enforcer Access Control Keypad, Outdoor

Flush Mount Model (see Surface Mount info below)

The SK-1123-FQ is the ideal keypad for office, commercial, and home security installations. This self-contained security keypad has a built-in 5-Amp relay output and a 100mA transistor ground output for maximum flexibility when connecting to electric door strikes, door alarms, door chimes, alarm control panels, or other security and access control applications. The outputs can be programmed for timed (1~999 seconds) or ON/OFF operation.

The SK-1123-FQ can be programmed for up to 100 4-digit to 8-digit user codes for the primary output, and up to 10 4-digit to 8-digit user codes for the secondary output. All programming and code information is stored in non-volatile EEPROM memory to protect the data in case of power loss.

  • Suitable for flush-mount applications. Fits conveniently in back box.
  • 2 Outputs:
  • Main relay (Form C 5A@30VDC).
  • Auxiliary (Transistor ground 100mA@24VDC).
  • Relay can be programmed for momentary (1~999 seconds) or latch.
  • Programmable LED keys: Full-time ON, ON when keys are pressed, Full-time OFF; suitable for solar applications.
  • Code flexibility: Each code can be 4~8 digits long.
  • Egress input for exiting the protected premises.
  • Dual voltage: 12~24 VDC/VAC operation.
  • Tamper switch: N.C. dry contact 3A@12VDC.
  • Mantrap: For a protected area with 2 doors, this feature allows only 1 door to be open at any time.
  • All features are programmed directly from the keypad, eliminating the need for an external programmer.
  • Duress output: Signals a silent alarm if an authorized user is forced to open the door under duress.
  • Door-forced-open and door-propped-open alarm output.
  • Door-hold-open mode available.
  • Keypad can be programmed to emit beeps for key presses or operate in silent mode.
  • Auto or manual code entry checking:
    • Auto: No # key required after each code.
    • Manual: # key must be pressed after every code.

Surface Mount Model

The SK-1123-SQ is the ideal keypad for office, commercial, and home security installations. This self-contained security keypad has a built-in 5-Amp relay output and a 1-Amp relay output for maximum flexibility when connecting to electric door strikes, door alarms, door chimes, alarm control panels, or other security and access control applications. The outputs can be programmed for timed (1-999 seconds) or ON/OFF operation.

The SK-1123-SQ can be programmed for up to 100 4-digit to 8-digit user codes for the primary output, and up to 10 4-digit to 8-digit user codes for the second output. All programming and code information is stored in nonvolatile EEPROM memory to protect the data in case of power loss.

  • 2 relays:
    • 5A@28VDC Form C, N.O./COM/N.C.
    • 1A@28VDC Form C, N.O./COM/N.C.
  • Each relay can be programmed for momentary (1-999 seconds) or latch.
  • Code flexibility: Codes can be 4~8 digits long.
  • Egress input for exiting the protected premises.
  • Dual voltage: 12~24 VDC/VAC operation.
  • Lifetime limited warranty.
  • Tamper switch: N.C. dry contact 3A@12VDC.
  • Mantrap - For a protected area with 2 doors, this feature allows only 1 door to be open at any time.
  • All features are programmed directly from the keypad: No need for an external programmer.
  • Duress output: signals a silent alarm if an authorized user is forced to open the door under duress.
  • Keypad active output.
  • Door-forced-open alarm output.
  • Door-propped-open alarm output.
  • Keypad can be programmed to emit beeps for key presses or operate in silent mode.
  • EEPROM memory protects programmed information in case of power loss.
  • Auto or manual code entry checking:
    • Auto: No # key required after each code.
    • Manual: # key must be pressed after every code.
  • SK-1011-SQ and SK-1131-SQ Digital Access Keypads also available. Contact SECO-LARM for details.
  • Low current draw suitable for solar applications.

Purchase the Seco-Larm Enforcer Access Control Keypad, Outdoor and you are guaranteed to save.

Find thousands of home automation products at the guaranteed lowest price, only at DiscountHomeAutomation.com.

Flush Mount Keypad Specifications

  • Type: Weather-Resistant Digital Access Keypad
  • Operating Voltage: 12~24 VDC/VAC
  • Current Draw:
    • Standby: 10mA@12VDC
    • Key pressed: 45mA@12VDC
    • Relay active: 100mA@12VDC
  • Number of Coded Outputs: 2
  • Transistor Ground Output: (1) 100mA@24VDC
  • Relay Output: (2) 5A@28VDC, Form C, NO/C/NC
  • Additional Output: Mantrap and duress
  • Egress: N.O. ground, 3A@12VDC
  • Door Sensor Input: N.C. ground
  • Dimensions: 4-3/4 x 3-1/8 x 1-15/16 inches (120 x 80 x 46mm)
  • Weight: 11 ounces (300 grams)

Surface Mount Keypad Specifications

  • Type: Weather-Resistant Digital Access Keypad
  • Operating Voltage: 12~24 VDC/VAC
  • Current Draw:
    • Standby: 15mA@12VDC
    • Key pressed: 45mA@12VDC
    • Relay active: 130mA@12VDC
  • Number of Relays: 2
  • Relay Output (1): 5A@28VDC, Form C, N.O./COM/N.C.
  • Relay Output (2): 1A@28VDC, Form C, N.O./COM/N.C.
  • Additional Output: Keypad active and alarm output
  • Egress: N.O. ground, 3A@12VDC
  • Door Sensor Input: N.C.
  • Dimensions: 4-15/16 x 3-1/8 x 2 inches (125 x 78 x 51 mm)
  • Weight: 18 ounces (510 grams)
 
DHA Shop With Confidence
Lowest Price ... Period
Happiness Guarantee
Easy Returns
Stocking Distributor
Open Since 2004!