NOTE: New E-920B replaces discontinued E-920A

Automatically dials up to four telephone numbers and delivers up to two different messages when triggered by an alarm system.

Features:

• Easily connects to an alarm panel and automatically dials out when activated.
• 2 independent voice messages. Stores up to 4 telephone numbers, cellular numbers, or pager numbers.
• Delivers a message of up to 16 seconds to each number stored.
• Instant trigger or exit and entry delay settings.
• Repeats the voice message for one minute per call.
• Waits 8 to 10 rings before dialing the next programmed number
• Calls two times when there is no answer or three times when the line is busy.
• EEPROM retains memory if power is lost for up to one year.
• Optional 9-Volt internal battery provides stand-by power for approximately two to three days.
• Use worldwide because of Universal Dial Tone.
• Use with PBX or regular telephone systems.
• 2 NO/NC trigger inputs.

Specifications:

• Operating voltage: 12VDC
• Current Draw:
  - 20mA (standby)
  - 60mA (operate)
  - 250mA (siren active)
• Trigger Inputs: 2 NO/NC
• Operating Temperature: -4° ~122°F (-20 ~50°C)
• Backup Battery: 9VDC (not included)
• # of Tel. Numbers: Up to 4
• Max. Digits per Tel. #: 32
• Case Material: ABS plastic
• Dimensions:
  - 57/8” x 4” x 11/2”
  - (148 x 100 x 39 mm)