|
|
| Seco-Larm Enforcer CCTV Ground Loop Isolator
|
|
|
|
|
Product Details
Seco-Larm Ground Loop Isolator
The ENFORCER Series Video Ground Loop Isolators are passive devices that help to reduce ground loop
interference caused by a difference in ground potential typically caused by unbalanced building power loads. Ground loop isolators can be installed in new installations or added to existing installations. Video ground loop isolators should be installed on the camera side of your cable and can be used with standard BNC coax cable or with video baluns over UTP.
SSEVG1C12AQ Info Sheet (.pdf)
SSEVG1C12AQ Manual (.pdf)
Features:
- Built-in Transient Voltage Suppression (TVS).
- Gold-plated BNC connector improves reliability and product life.
- Passive operation -- No external power required.
- High immunity from interference -- Built-in impedance coupled device and noise filter.
- Helps to reduce RF interference, cross talk, picture tearing, and other picture quality problems.
- BNC and quick connect terminals for easy installation.
- Small size, only 2-7/8" x 1" x 1" (73 x 28 x 26 mm).
Specifications:
- Bandwidth: Video DC to 8MHz
- Maximum Input: 1.0Vp-p
- Insertion Loss: <0.5dB
- Frequency Response: 0-3dB at 10MHz
- Isolation Voltage: 600VDC (Min)
- Insulation Resistance: 100M Ohm
- Transient Voltage Suppression: 12Vrms
- Range: 984' (300m)
- Connectors In: BNC Male
- Connectors Out: BNC Female (VG-1C12AQ)
- Impedance: 75 ohm
- Dimensions: 3-3/32" x 1 " x 3 " (78.6 x 29.4 x24.4 mm)
- Material: ABS Black
- Temperature: Operating temp. 32°~131° F (0°~55° C)
Purchase the Seco-Larm Ground Loop Isolator (SSEVG1C12AQ) and you are guaranteed to save.
Find thousands of home automation products at the guaranteed lowest price, only at DiscountHomeAutomation.com
|
|
|
|
|
|
