Skip to main content
  • Home
  • SkylinkHome 3-Way Dimmer Starter Kit

SkylinkHome 3-Way Dimmer Starter Kit

$32.84
SKU: SKSK7

IN STOCK! Ships same business day if ordered before 3pm PT

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Product Description

The SkylinkHome Wireless 3-Way On/Off/Dimmer Kit gives you the convenience of adding an extra wall switch without the hassle of running additional wiring. You can turn lights on and off or dim and brighten from either end, making it ideal for stairwells, garages, bedrooms, or basements. Easily install by replacing your existing wall switch with the Skylink Wall Switch receiver (WR-001) and mount the Wireless Wall Switch transmitter with screws or double sided tape (included) anywhere you would like to control your lighting.

  • Add a wall switch wherever needed, without running additional wiring.
  • Replace your existing wall switch with the Skylink On/Off/Dim Switch receiver (WR-001).
  • Install without neutral wire! Easy installation and DIY.
  • Mount Wireless Wall Switch (TB-318) anywhere you would like to control your light.
  • Ideal for use on stairwells, entrance ways, garages and bedrooms.
  • Turn your lights on/off or dim/brighten from either location.
  • Snap on a decorative cover (Model TM-001) on the opening of the Wall Switch receiver, (sold separately) for a stylish look.
  • Works with incandescent, CFL or Tungsten light bulbs.
  • Operation range up to 500ft in an open area.

Unlike many other brands of wall switches, our Skylink HomeControl Wall Switch receiver doesn't require neutral wiring, making the installation even easier. The Wireless Wall Switch transmitter is operated by a long life lithium battery and carries a signal up to 500 feet away in an open area. You can also add up to eight Skylink wireless transmitters, such as the Wireless Wall Switch (TB-318), Motion Sensor (ID-318) or Remote Controls (TC-318 Series), to control your Wall Switch receiver.

To give the Skylink Wall Switch receiver a more stylish look, snap on a decorative cover, TM-001 (sold separately), to the opening of the Wall Switch receiver (WR-001). Once the Snap-On Cover has been placed on the opening of the Wall Switch receiver, simply press the cover to turn the lights on/off, or tap and hold the cover to dim/brighten the lights.

*For dimming function, light bulbs must be dimmable.

In The Box:

  • Wall Switch On/Off/Dim Receiver (WR-001)
  • Wireless Wall Switch Transmitter (TB-318)
  • User Manual
  • Screws and Double Sided Tape

Available for sale only in the U.S.

Tech Specs

Wall Switch On/Off/Dim Receiver

  • Input Voltage: 120VAC, 60Hz
  • Standby Current: 0.2mA
  • Minimum Load: 10W
  • Maximum Load: 300W at 120VAC
  • Operating Frequency: 318 MHz
  • Operational Temperature: -4 to 140° F (-20 to 60°)
  • Humidity: 5 to 95 percent
  • Wireless Range: Up to 500 feet in open area
  • Approvals: FCC, UL, cUL

Wall Switch Transmitter

  • Input Voltage: 120VAC, 60Hz
  • Standby Current: 0.2mA
  • Operating Frequency: 318 MHz
  • Operational Temperature: -4 to 140° F (-20 to 60°)
  • Humidity: 5 to 95 percent
  • Wireless Range: Up to 500 feet in open area
  • Approvals: FCC, UL, cUL