X10 PRO 4-Button Keypad Plus Transmitter Base Kit

A matched set X10 wall transmitter and one-button keypad used to transmit directly over your home's power lines.

The XPT Base Controller is mounted into a standard single-gang wall box. It is wired to Hot and Neutral.

When attached to the XPT Wall Controller, the XP Keypad controls ON/OFF of one different X10 command to the House Code matching that set on the XPT Base Transmitter. Unit Number Addresses run in Sequential Order ascending up from the set Number Dial Address.

To assemble, place the keypad cover onto the XPT Base by inserting the tab on top of the Keypad under the notch on the XPT Base. Gently, but firmly press the bottom of the Keypad into place so that the pins on the back of the Keypad insert into the XPT Base socket.

NOTE: Due to X10 Product changes, these Transmitter Bases are not compatible with Transmitter Bases sold prior to July, 2007.