X10 PRO 4-Button Keypad (4 Address)

Used in conjunction with the XPT (Wall Transmitter Base), the XP4 allows ON/OFF control of four sequential X10 Addresses.

The XP Keypads are designed to operate when attached to an XPT Wall Controller. There are seven possible KEYPADS to choose from, allowing multiple control solutions from various locations.

Place the desired Keypad cover onto the XPT Base by inserting the tab on top of the Keypad under the notch on the XPT Base. Gently, but firmly press the bottom of the Keypad into place so that the pins on the back of the Keypad insert into the XPT Base socket.

NOTE: The XPT, with a Keypad, does not switch any loads, it is a transmitter only.