|
|
| X10 PRO Appliance Module, 2 Prong
|
|
|
|
|
Product Details
X10 PRO Appliance Module, 2 Prong
The XXPPAM01 Appliance Module (Non-Dimming) is the easiest way to automate radios, fans,
air conditioners and lights over 300 watts! Add remote control to any household electronic
device in seconds, including radios, fans, air conditioners and non-dimmable or fluorescent
lamps! Just plug the device into one of these X10 Appliance Modules, plug the Module into
an outlet, and the device can now be turned On or Off
from any X10 Controller in the house!
The AGC (Automatic Gain Control) Appliance Module incorporates an advanced X10 Powerline
Circuit design which allows the Module to operate in adverse environments. The principal
advantages are greater sensitivity and better noise rejection. These Modules are
recommended for all installations where reliability of operation is paramount.
Note: LOCAL CONTROL: The Appliance Module can "Sense" if any load is plugged into
it. When the load on/off switch is toggled to the On position, the Module responds by
turning ON the load connected to it.
Specific Requirements:
- 120VAC, NON DIMMING
- Minimum Load = 40W Lamps/Loads rated below 40W may flicker and/or operate
erratically.
- 15A - Resistive Load
- 1/3HP - Motor Load
- 500W - Incandescent Load
- 400W - TV/Stereo Load
Purchase the X10 PRO Appliance Module, 2 Prong (XXPPAM01) and you are guaranteed to save.
Find thousands of home automation products at the guaranteed lowest price, only at DiscountHomeAutomation.com
|
|
|
|
|
|
