|
|
| X10 PRO Passive Blocking Filter
|
|
|
|
|
Product Details
X10 PRO Passive Blocking Filter
The X10 PRO Split-Phase or 3-phase 250A Signal Blocking Coupler is designed to attenuate
(at a rate of 30:1) X10 Command Signals from crossing from one household to another via the
AC wiring. The Coupler/Blocker is installed between the Meter and the Breaker Panel,
using the Copper Neutral Wire between the two. The unit may be used in Split or Three Phase
installations. For best results, a XXPPZZ01 should be installed at both homes experiencing
the signal crossings. Unique features of the design include its ability to efficiently
couple X10 Signals between phases, the elimination of any direct connections to the power
company-side wiring and the elimination of heavy current carrying inductors, resulting
in a very compact design. DO NOT use any other X10 Phase Coupler, if installing the
XXPPZZ01.
Note: Installation must be performed by qualified installers only. The Main Breaker
must be turned OFF during installation. The Coupler must be installed in a suitable workbox
or enclosure per local code. Installation must be in accordance with all applicable codes
and requirements, including, but not limited to, the National Electrical Code (NEC).
Specific Requirements:
- 240VAC.
- Split-Phase System 120/240V - L1, L2.
- Three Phase System 120/208Y - L1, L2, L3.
Purchase the X10 PRO Passive Blocking Filter (XXPPZZ01) and you are guaranteed to save.
Find thousands of home automation products at the guaranteed lowest price, only at DiscountHomeAutomation.com
|
|
|
|
|
|
