Central Processor

• Four Audio/Video Source Inputs
• Video sensing (NTSC/PAL Sync) on each input for power management of common source components
• Current sensing (>20mA-<10A) for each input for power management of common source components and future control modules using the optional CSM1 (sold separately)
• Internal memory (96 Kbytes non-volatile flash) for storing IR codes.
• Programmable only with Dragon Drop-IR Programming Software.
• Recognizes Xantech RC68+ Commands to initiate sequences of IR or amplifier commands.
• Outputs single IR commands or IR sequences.
• Sends "busy" signal to keypads (sold separately) when system is active.
• IR learning eye on back panel of Controller/Amplifier is used as an IR learning port with Dragon Drop-IR™ software.
• DB-9 RS232 Serial port for programming, expansion and upgrading firmware (Future Proof).

Zone Features/Specifications

• Each zone has 1 RJ45 connector for MRC44 keypad, 1 composite video output, 1 speaker-pair terminal and a 12VDC status output.
• Multiple zones can be linked to behave as one zone.
• 25 Watts per channel.
• Frequency response: 12 Hz to 55KHz (±3dB)
• THD: <0.08%.
• Signal-to-noise ratio: > 96dB A-weighted

Five IR Emitter Ports

• Four source specific IR emitter ports and one common IR output.