Use in projects with little to no interference from TVs or light sources. Works great with DLP, standard CRT video and rear-projection displays.

Prepackaged kit includes:

(1) 49010D Peep Hole Style - The Micro Link IR Receiver is a small peep-hole style infrared repeater assembly. The Micro Link IR Receiver is equipped with a 7-foot cable and a 3.5mm stereo mini plug, which is plugged directly into the “IR RCVR” jack on the connecting block, such as the models 789-44, CB60, and 791-44. The Micro Link IR Receiver is primarily intended for use in installations where the connecting block is within reach of its 7-foot cable – as when installing the Micro Link IR Receiver in a cabinet where the controlled equipment is behind closed doors.

(1) 789-44 Connecting Block - The Model 789-44 provides a quick low cost means of connecting Xantech IR receivers and keypads to four single or four dual emitters, with a power supply, in an infrared repeater system. It can also provide emitter expansion for various Xantech devices, such as the 590, 710, 792-10, 795-20, 796-20, etc

(1) 781ERGPS Power Supply - A high-efficiency power supply specified to provide power to all Xantech IR products. A versatile plug has a locking indentation ring providing a secure connection to all Xantech IR connecting blocks. A small form-factor allows tighter installation and reduces a clumsy rack-installation.

(4) 283D Visible Designer Emitters - The 283D Blink-IR Designer Emitter contains a small Infrared LED housed in a miniature, designer styled, black appearing, injection molded plastic shell. Unlike other emitters, the 283D emits visible red light in addition to IR (infrared) control signals when activated by IR commands sent to it by IR receivers or other Xantech controllers. The 283D is designed to be installed directly on the IR sensor window of the controlled device.