2GIG Dual Flood/Temperature Sensor
Product Description
The 2GIG Flood & Temperature Sensor (2GIG-FT1-345) will monitor the ambient temperature of a room and will detect wet/dry conditions to prevent floods from occurring. It's a fully supervised, tamper protected one-way 345 MHz sensor that will send alerts to the GoContol panel whenever a water leak is detected or the ambient temperature exceeds 95° F or falls below 42° C. The sensor is also capable of detecting clean or dirty fresh water, salt water, or tap water.
- Detects standing water that reaches the sensor probe
- Sends alert to GoControl panels when water is detected
- Sends trouble alert to the panel when the ambient temperature exceeds 95° F
- Sends trouble alert to the panel when the ambient temperature falls below 42° F
- Includes lithium battery (typical battery life of 5 years)
- ETL listed
Notes: Requires Firmware Version 1.14 or later for GC2 panel and 3.1 or later for GC3.
Tech Specs
- Part Number: 2GIG-FT1-345
- Wireless Signal Range: 275 ft. (80 m) open-air with Wireless Control Panel
- Code Outputs: Alarm; Alarm Restore; Supervisory Low Battery; Tamper; Tamper Restore; Trouble; Trouble Restore
- Transmitter Frequency: 345 MHz (crystal controlled)
- Supervisory Interval: 70 minutes
- Battery: CR 2.3V Lithium (included)
- Battery Life: 5 Years
- Housing Material: ABS Plastic
- Dimensions:
- Sensor Probe: 2.92(H) x 0.94(W) x 0.85(D) inches (74.17 x 23.88 x 21.59 mm)
- Sensor Probe in Probe Bracket: 1.46(H) x 1.54(W) x 0.57(D) inches (37.08 x 39.12 x 14.48 mm)
- Cord between Sensor and Probe: 45-inch cord with 0.169-inch diameter (114.3 cord, 4.29mm diameter)
- Warranty: 2-Year Limited