ABB-Welcome Camera Interface
Product Description
The camera interface integrates common analog camera into the ABB-Welcome door entry system and up to 4 analog cameras can be connected with it. Each external camera is powered by itself.
- Supports up to 4 analog third-party cameras for one device
- Supports camera connection to the existing video/audio outdoor station
- Supports transfer of image from guard unit to the indoor station
- Supports the camera for viewing the area of the floor (for example, with the connection from indoor station to this interface, where it connects to the analog camera)
- Supports input and output of video signal of outdoor station to third-party DVR during the call, which can be viewed from the video indoor station
- Surface mount or DIN rail mount
NOTE: Connects to Outdoor Station (not included).
Tech Specs
- Part Number: 83327-500
- Operating Temperature: -13° to 131°F (-25° to 55°C)
- Protection: IP30
- Single-Wire Clamps: 2 x 0.28 mm2 – 2 x 0.75 mm2
- Fine-Wire Clamps: 2 x 0.28 mm2 – 2 x 0.75 mm2
- Bus Input Voltage: 20-30VDC
- Video Input: 1Vp-p, PAL/NTSC
- Video Output: 1Vp-p at 75 ohms, PAL/NTSC
- Interface to Camera: Coax cable, max 100m; Other cables, 10-50m
- Dimensions: 3.03 x 2.4 x 0.98 inches (77 x 61 x 25 mm)
- Warranty: 2 Years
System Capacity
- 9 Guard Units per System
- 60 Buildings per System
- 250 Indoor Stations per Building
- 9 Outdoor Stations per Building (including gate and other outdoor stations)
- 2 Locks per Outdoor Station