Autoslide Wired IR Motion Sensors, Twin Pack

The Autoslide Wired IR Motion Sensors, Twin Pac, is an add-on accessory for the Autoslide automatic sliding door system. The Wired IR Motion Sensor connects to the Autoslide using the cables that are included. It can be installed above the door for people or low on the door jamb for pet use. When the IR beam from the sensor is broken by an approaching person or pet, the Autoslide system will immediately be triggered to open the door and provide hands-free convenience. This is especially helpful when your hands are full or if a certain family member has trouble remembering to shut the door behind them. The IR beam length is adjustable, allowing it to be set so that an approaching young child will not activate the door. The Wired IR Sensor is hardwired to the Autoslide system, it does not require any batteries for operation.

It is important to note that installation of only one IR Motion Sensor will only automate the sliding door one-way. To fully automate your sliding door from the inside and outside, two Infrared Motion Sensors will need to be installed.

In The Box:

• Hardwired Infrared Motion Sensor (Twin Pack)
• Cables to Wire Sensor to the Autoslide System
• Mounting Screws

NOTE: The infrared motion sensors must be mounted out of direct sunlight or weather/rain exposure.