• Home
  • Dakota Alert 4000 Break Beam Alert Kit and Receiver with Relays

Dakota Alert 4000 Break Beam Alert Kit and Receiver with Relays


IN STOCK! Order before 3 p.m. Pacific Time and we'll ship it today!

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

The Dakota Alert Break Beam Alert Kit with Receiver with Chime and Relay is a solar powered wireless infrared break beam system that is simple to install and requires no wiring. The kit includes a pair of Dakota Alert Break Beam Transmitters and a Dakota Alert 4000 Receiver.

The break beam transmitters are a pair of wireless point to point sensors that activate and send an alert signal when a large moving subject interrupts their transmission. The sensors are not affected by small objects such as falling leaves or birds. It can be mounted high enough to avoid dogs and other animals but it will detect any intruder walking through the beam area. The beam sensor is ideal for outdoor applications such as storage lots, lumber yards, car dealerships, etc. Multiple sensor pairs can be used to send a signal to one receiver if you wish to set up a perimeter.

The break beam sensors are powered by lithium ion batteries that are recharged through built-in solar panels, eliminating the need to run wires for power or signal connection. Installation time can be as little as a few minutes. The infrared sensing terminals can be mounted up to 300 feet apart and will send a signal back to the DCR-4000 receiver up to a mile away* anytime something moves between the sensors.

The 4000 Series Receiver with Chime and Relay connects with multiple Dakota Alert 4000 series wireless alarm systems or sensors within a range of 1 mile. It can connect with up to 16 wireless 4000 series transmitters and offers a selection of 12 different tunes to help distinguish between alerts. The receiver has two form C relay outputs and a 12VDC relay output that activates when a connected sensor is triggered. The relay and voltage outputs can be set to trigger on a delay between 1 second, 5 seconds, 15 seconds, or 5 minutes after a sensor is activated.

In The Box:

  • 2 x Break Beam Sensors
  • 4000 Series Receiver
  • Power Adapter
  • User Guide

NOTE: Actual range will vary depending on the environment.

  • Part Number: BBA-4K Plus
  • Number of Sensors: Up to 16 Sensors
  • Outputs:
    • 2 x form C (normally open and normally closed) relays, rated 3A
    • 1 x 12VDC output max 400mA
  • Operating Voltage: 12VDC – Power Supply Included
  • Frequency: 433.92 MHz
  • Wireless Range: up to 1 mile (1.6km)*
  • Receiver Dimensions: 3.3in (H) x 5in (W) x 1.3in (D)
  • Power supply: 12 VDC, 500 mA
  • Wireless Range: up to 1 mile (1.6 km)
  • Dimensions: 3.25 x 1.75 in. (8.25 x 4.45 cm)
  • Operating Frequencies: 433 MHz
  • Operating Temperature: -30 to 120°F (-34°C to 48°C)
  • Warranty: 1 Year