Dakota Alert 4000 Series Vehicle Sensing Probe and Receiver Kit with Relays

The Dakota Alert 4000 Series Vehicle Sensing Probe and Receiver Kit With Relays will notify you when a vehicle pulls up your driveway. This vehicle detection kit is optimized for properties with long driveways, driveways with separate entrances and exits, or large property lots with multiple entryways or buildings. It includes a receiver, transmitter, 2 probes and 50ft of weatherproof wire. The probes are buried parallel to the driveway, and will detect passing vehicles approximately 10-12 feet away. The 50ft wire can also be buried and run to a nearby mounting location for the transmitter box, such as a tree or post. The transmitter is powered by three CR123A batteries. When a vehicle drives by, the transmitter will send a signal to the DCR-4000 receiver up to 1 mile away.

The 4000 Series Receiver with Chime and Relay connects with multiple Dakota Alert 4000 series wireless alarm systems or sensors within a range of 1 mile. It can connect with up to 16 4000 series transmitters and offers a selection of 12 different tunes to help distinguish between alerts. The receiver has two form C relay outputs and a 12VDC relay output that activates when a connected sensor is triggered. The relay and voltage outputs can be set to trigger on a delay between 1 second, 5 seconds, 15 seconds, or 5 minutes after a sensor is activated.

In The Box:

• 4000 Series Receiver with Relays
• 4000 Series Transmitter
• 2 x Underground Probes
• 50ft Burial Wire
• 12VDC Transformer
• 3 x CR123A Batteries (U.S. orders only)

NOTE: The transmitter is only compatible with the 4000 series receivers. Signal range of the transmitter will vary depending on the environment. CR123A batteries not included on orders outside of the United States.