• Home
  • Elk Magic Module Controller

Elk Magic Module Controller

$55.44
Item # ELKMM220

IN STOCK! Order before 3 p.m. Pacific Time and we'll ship it today!

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

The Magic Module is available with 2 Input/2 Output or 4 Input/4 Output.

The Magic Module 2 Input/2 Output (MM220) is a two digital input, two form C relay output programmable controller. It may be used as a stand alone field programmable controller in a vast array of applications from timers, single zone security system, pulse stretcher, simple process controllers, etc.

The Magic Module 2 Input/2 Output (MM220) comes factory pre-programmed as a single zone security system and can be re-programmed by using a personal computer. The MM220 program is stored into re-programmable Electrically Erasable Programmable Read Only Memory (EEProm memory). The Elk Starter Kit (ELK-MK400) contains components and software needed for programming.

The Magic Module 4 Input/4 Output is a four analog or digital input, four relay output programmable logic controller (PLC). It may be used as a stand alone field programmable controller in a vast array of applications from timers, door controllers, simple process controllers, multiple zone security controls, etc. or as a networked controller with up to 31 other modules connected on a common RS-485 data bus.

The Magic Module 4 Input/4 Output supports transmitting and receiving commands from two way X-10 Power Line Carrier Devices. Also optional interfaces are available for reading Temperature, Clock/Calendar, Wiegand Proximity devices, Dallas iButton identification devices.

Magic Module 2 Input/2 Output Features:

  • Two Digital Inputs
  • Two Relay Outputs (jumper programmable "transistor open collector" output on relay 2)
  • 4096 program bytes using SIMPLE programming language
  • 4 general purpose Counters, range 0 to 255 counts
  • 4 general purpose Timers, range 1/10 second to over 255 hours
  • Program stored in non-volatile EEProm memory
  • Surface Mount ABS Enclosure with Snap-On Cover

Magic Module 4 Input/4 Output Features:

  • Four analog or digital inputs
  • Four relay outputs (2 relay outputs may be jumper programmed for transistor open collector outputs)
  • 16,384 program bytes using SIMPLE programming language
  • 4 general purpose Counters, range 0 to 255 counts
  • 4 general purpose Timers, range 1/10 second to over 255 hours
  • Networked to optional PC and up to 31 ELK-MM443's through a RS-485 data bus.
  • X-10 Power Line Carrier Interface. PL513, PSC04 (Transmit Only), or TW523, PSC05 (Two Way).
  • Analog transmission MM443 to MM443 and Preset Dim Commands.
  • Dallas iButton TouchKey Reader with optional ELK-MA100 or ELK-MA290 interface
  • Programs the ELK-MM220 (two inputs, two relay outputs)
  • Emulates ELK-MM220 for code development
  • Program stored in non-volatile EEProm memory
  • Mounts to single or double gang electrical box.
  • Optional DIN Rail Mounting. PCB mounts into 4 inch SnapTrack.

Magic Module 2 Input/2 Output Specifications:

  • Inputs: 2 Digital inputs, Jumper programmable for +12v or pull to ground input level. 0 to 2 volts is low, 2 to 15 is Hi.
  • Outputs: 2 Form "C" Relays, 10 Amps @ 120VAC or 7 Amps @ 28VDC; One relay output may be configured as open collector transistor output – 100 ma. Max.
  • Operating Voltage: 9.5-15 Volts DC
  • Current Draw: 10 ma. Nominal, 70 ma. Maximum with both relays active.
  • Enclosure: Black ABS Plastic: 4.5" x 3" x 1.2"

Magic Module 4 Input/4 Output Specifications:

  • Inputs: 4 Analog, 0 to 13.6 volts, with jumper programmable 2k pull up resistor to 12 V, or 2k pull down resistor to ground. May be left floating. Software programmable high and low threshold levels per input for end-of-line resistor circuits. Input impedance (floating input) – 100K ohms
  • Outputs: 4 Form "C" Relays, 10 Amps @ 120VAC or 7 Amps @ 28VDC; Two relay outputs may be configured as open collector transistor outputs – 100 ma. Max.
  • Operating Voltage: 9.5-15 Volts DC
  • Current Draw: 10 ma. Nominal, 130 ma. Maximum with all relays active.
  • X-10 Interface: PL513, PSC04 or TW523, PSC05 – 4 wire RJ-11 telephone style
  • Data Bus: RS-485, max bus length: 4000 feet w/22 AWG wire
  • Enclosure: White Plastic: 6.5" W x 4.375"H x 2"D