• Home
  • FIBARO Z-Wave RGBW Controller

FIBARO Z-Wave RGBW Controller

$69.99
Item # FBFGRGBW

IN STOCK! Order before 3 p.m. Pacific Time and we'll ship it today!

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

The FIBARO RGBW Controller is a universal, Z-Wave compatible RGB / RGBW controller. FIBARO RGBW Controller uses PWM output signal, which enables it to control LED, RGB, RGBW strips, halogen lights and fans. Controlled devices may be powered by 12 or 24 VDC. In addition the device supports up to four, 0V – 10V analog sensors, such as temperature sensors, humidity sensors, wind sensors, air quality sensors, light sensors etc. All IN and OUT terminals may be user configured for LED control or 0V-10V signal readouts.

  • Controlled by FIBARO System devices or any Z-Wave controller
  • Microprocessor controlled
  • Executive element: transistor
  • Active and historic (average) power consumption measuring
  • Part Number: FGRGBWM-441
  • Power Supply: 12/24VDC
  • Rated Output Power:
    • Single output channel: 6A
    • All output channels combined: 12A
  • PWM Output Frequency: 244 Hz
  • Electricity Consumption: 0.3W
  • Radio Signal Power: 1mW
  • For Installation in Boxes: Ø≥50 mm
  • Max Load (e.g. halogen bulbs):
    • at 12V: 144W combined
    • at 24V: 288W combined
  • Radio Protocol: Z-Wave
  • Radio Frequency: 908.4 MHz
  • Wireless Range: Up to 165 feet (50 m) outdoors, or up to 100 feet (30 m) indoors (depending on terrain / building structure)
  • Operational Temperature: 0 to 40 degrees C
  • Dimensions: 42(L) x 37(W) x 17(H) mm
  • Certifications: Z-Wave, ISO 9001, RoHS, FCC, CE
  • Warranty: 12 Months