FortrezZ Z-Wave Plus Flood & Temperature Sensor, Gen5 (U.S.)
Product Description
Our flood sensor alerts you when it gets wet. Just simply place on the floor near water-using appliances and fixtures such as dishwashers, toilets, and washing machines. Water damage is caused by leaking pipes, corroded water heaters, leaky toilets, fixtures in bathrooms, laundry rooms with aging appliances, and more. Our sensor is a Z-Wave Plus enabled device. Pair to your Smart Home network and receive alerts to your phone when leaks are detected. Sensors work with our Water Shut-off Valve to prevent water damage from leaks by detecting the leak first, then turning off the water supply to the house, preventing any further leak.
Applications:
- Bathtub / Hot Tub
- Under Sinks
- Sump Pump
- Refrigerator
- Water Heater
- Toilet
- Freeze Detection (pipes, rooms, etc.)
- Dishwasher
- Laundry Washing Machine
In The Box:
- Flood and Temperature Sensor
- 4 x Cover Screws
- Install Guide
NOTE: Requires any Z-Wave enabled network and controller. Works with: SmartThings, HomeSeer, Nexia, Fibaro, VERA, Zipato Controllers. Does not include batteries.
Tech Specs
- Part Number: FTS05US
- Protocol: Z-Wave Plus
- Power: (2) AA alkaline batteries (not included)
- Battery Life: 1 to 2 years with no alarms in default Z-Wave network settings
- Frequency: 908.4MHz (U.S.) Z-Wave
- Wireless Range: Up to 25 feet indoors, max 100 feet line of sight in unobstructed environment,
- System Requirement: Any Z-Wave enabled network and controller.
- Operating Temperature: 14° to 158°F (-10° to 70°C)
- Reported Temperature: At the unit with ± 2°C accuracy
- Dimensions: 3.0(L) x 2.1(W) x 1.1(H) inches (7.62 x 5.334 x 2.794 cm)
- Weight: 0.24 pound (108.86 g)
- Approvals: FCC, IC
- Warranty: 1-Year Limited