FortrezZ Z-Wave Plus Flood & Temperature Sensor with Probe & Power Supply, Gen3 (U.S.)
Product Description
The FortrezZ Z-Wave Flood & Temperature Sensor with Probe and Power Supply, Gen3 alerts you when it gets wet. Just simply place the sensor near water-using appliances and fixtures such as dishwashers, toilets, and washing machines. When water touches the probes on the bottom of the main sensor or the probes on the sensor cable, alert signals will be sent to your Z-Wave hub and connected smartphone. Water damage is caused by leaking pipes, corroded water heaters, leaky toilets, fixtures in bathrooms, laundry rooms with aging appliances, and more. Flood and Temperature sensors work with the FortrezZ Water Shut-off Valve to prevent water damage from leaks by detecting the leak first, then turning off the water supply to the house, preventing any further leak.
Applications:
- Bathtub / Hot Tub
- Under Sinks
- Sump Pump
- Refrigerator
- Water Heater
- Toilet
- Freeze Detection (pipes, rooms, etc.)
- Dishwasher
- Laundry Washing Machine
In The Box:
- Flood and Temperature Sensor
- Water Sensor Probe, 9ft Cable
- 110V AC Power Adapter
- 4 x Cover Screws
- Install Guide
NOTE: Requires any Z-Wave enabled network and controller. Works with: SmartThings, HomeSeer, Nexia, Fibaro, VERA, Zipato Controllers. Does not include batteries.
Tech Specs
- Part Number: FTS05PUS
- Protocol: Z-Wave Plus
- Power: Two AA batteries and 110V AC Adapter
- Battery Life: 1 to 2 years with no alarms in default Z-Wave network settings
- Frequency: 908.4MHz (U.S.) Z-Wave
- Wireless Range: Up to 25 feet indoors, max 100 feet line of sight in unobstructed environment
- System Requirement: Any Z-Wave enabled network and controller.
- Operating Temperature: 14° to 158°F (-10° to 70°C)
- Reported Temperature: At the unit with ± 2°C accuracy
- Dimensions: 3.0(L) x 2.1(W) x 1.1(H) inches (7.62 x 5.334 x 2.794 cm)
- Weight: 0.24 pound (108.86 g)
- Approvals: FCC, IC
- Warranty: 1-Year Limited