• Home
  • GE Z-Wave Plus Dimmer Wall Smart Switch, 1000W (Gen5)

GE Z-Wave Plus Dimmer Wall Smart Switch, 1000W (Gen5)

$53.50
Item # JA14299

IN STOCK! Order before 3 p.m. Pacific Time and we'll ship it today!

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Transform any home into a smart home with the GE Z-Wave Smart 1000W Dimmer. The In-Wall Smart 1000W Dimmer can easily replace any standard in-wall switch and remotely controls a light in your home.

Your home will be equipped with ultimate flexibility with the GE Z-Wave Smart 1000W Dimmer, capable of being used by itself or with up to two add-on switches. Screw terminal installation provides improved space efficiency when replacing existing switches and the integrated LED indicator light allows you to easily locate the switch in a dark room.

The GE Z-Wave In-Wall Smart 1000W Dimmer is compatible with any Z-Wave certified gateway, providing access to many popular home automation systems. Take control of your home lighting with GE Z-Wave Smart Lighting Controls!

  • Turn ON/OFF and adjust dim levels manually or remotely via the Z-Wave controller
  • Can be Included in multiple Groups and Scenes
  • May be used in single pole installation or with up to two GE Add-on switches in 3-way or 4-way wiring configurations
  • Compatible with incandescent bulbs only
  • Interchangeable Paddle switch – White and light almond paddle in package
  • Uses a standard, decorative-size wall plate for single gang installations (wall plate not included)
  • Blue LED indicates switch location in a dark room
  • Z-Wave Certified for simple pairing and integrated home automation
  • Screw Terminal Installation – requires wiring connections for Line (Hot), Load, Neutral, and Ground. Traveler wire required for 3-way or 4-way installation.
  • This device supports lifeline (association group 1)

This Z-Wave device has advanced features that allow you to customize your experience. These features can only be adjusted by a Z-Wave enabled controller that supports the Z-Wave Configuration command class.

NOTE: Requires a Z-Wave controller (sold separately). Does not include wallplate.

  • Part Number: 14299
  • Color: White, Light Almond
  • Power: 120 VAC, 60 Hz
  • Signal (Frequency): 908.42 MHz (U.S.)
  • Protocol: Z-Wave Plus
  • Minimum Load: 40W, incandescent lamps only.
  • Maximum Loads: 1-gang 1000W, 2-gang 800W, and 3-gang 600W incandescent lamps only.
  • Wireless Range: Up to 150 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module.
  • Operating Temperature Range: 32° to 104°F (0° to 40°C)
  • Environmental: For indoor use only.
  • Approvals: FCC, IC, UL/cUL
  • Warranty: 2 Years