HomeSeer Z-Wave Plus Floodlight Sensor

$49.00

Quantity	Price

SKU: HSFLS100G2

IN STOCK! Ships same business day if ordered before 3pm PT

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Product Description

The HomeSeer HS-FLS100+ G2 Z-Wave Plus Floodlight Sensor reports back to your smart home hub when motion is sensed and when dusk or dawn happens. HS-FLS100+ G2 can be programmed to control your floodlights automatically or remotely when commands are received from your smart home software or hub.

Motion (PIR) sensor
Light sensor (up to 900 LUX)
Temperature Sensor
Floodlight power control (up to 300 watts)
May be used with 120V incandescent or LED floodlight bulbs
Controller-adjustable motion timeout and light sensitivity
Fits most standard floodlight mounting brackets
Easy replacement for non-Z-Wave sensors

Typical Uses

HS-FLS100+ G2 is an outdoor MOTION, TEMPERATURE and LUX sensor that may be used in a variety of ways:

Automatically turns on floodlights when motion is sensed and it's dark (Conventional Mode).
Turns floodlights on or off when it receives Z-Wave commands from the controller (Smart Mode).
Sends Z-Wave commands when motion is sensed or has not been sensed for a period of time.
Sends LUX information to the controller using Z-Wave commands.
Sends Temperature information to the controller using Z-Wave commands.
HS-FLS100+ G2 can be used as a retrofit sensor replacement for most motion-activated floodlight fixtures. The motion timeout interval and LUX sensitivity are adjustable via Z-Wave commands.

In The Box:

HS-FLS100+ G2 floodlight sensor
Mounting arm
(3) crimp connectors
Installation guide

NOTES: Requires a Z-Wave home automation controller. (When used with a HomeSeer controller/system, requires Z-Wave plug-in v3.0.1.231 or higher). Requires a compatible motion-activated floodlight fixture (typically two-headed floodlight fixture with centered motion-activated sensor). This sensor is designed for 120 VAC use and will work with most conventional floodlight fixtures that are wired with 120 VAC lamp sockets. It is NOT compatible with low voltage fixtures. If you have a low voltage fixture, you will need to replace it to use this sensor.