• Home
  • HomeSeer Z-Wave Plus Scene-Capable RGB On/Off Wall Switch, 200 Series

HomeSeer Z-Wave Plus Scene-Capable RGB On/Off Wall Switch, 200 Series

$44.95
Item # HSWS200

IN STOCK! Order before 3 p.m. Pacific Time and we'll ship it today!

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

HS-WS200+ is a Z-Wave Plus relay (on-off) wall switch for use with most lighting and appliance loads. The switch includes RBG LED indicators which may be controlled wirelessly to suit color preferences or to reflect the changing status of other devices in your home. HS-WS200+ is also designed to trigger automation events with a multi-tap operation (up to 5 taps). HS-WS200+ may be used with most home controllers but should be used with HomeSeer Hometrollers for best compatibility with all features.

Main Features

  • Supports wireless on-off control of lighting and appliance loads
  • Color and blink status of LED indicator is controlled with Z-Wave commands
  • Supports multi-tap and press and hold event triggers up to 5 taps (14 possible triggers)
  • Supports instant status when controlled locally
  • Compatible with HomeSeer (and many other) home controllers
  • Supports S2 Security
  • Easy 'screw terminal' installation

Operation

Once installed, HS-WS200+ works like any other paddle-style switch and will turn the attached load on or off. However, add it to any HomeSeer system and you'll be able to trigger up to 14 different events!

RGB LED Indicator

In normal mode, the LED indicator glows to reflect the on/off status of each circuit using a palette of 7 possible colors. Normal mode colors can be set once and left or can be programmed to change every day or on holidays, birthdays and other special events. For example, you can program the LED to glow green and red on holidays.

In status mode, the LED can be controlled to reflect the status of nearly anything in the home. For example, if the front door is closed and locked, it can glow green. If the door is closed but not locked, it can glow yellow. If the door is open, it can blink red. If no status conditions are active, wall switches automatically return to normal mode.

Multi-tap Triggers

  • Press top or bottom of paddle once – turns attached load on or off and can also trigger 2 HomeSeer events
  • Press and hold top or bottom of paddle – triggers 2 HomeSeer events
  • Press top or bottom of paddle 2, 3, 4, or 5 times – triggers up to 8 more different HomeSeer events

In The Box:

  • HS-WS200+ wall switch
  • User Guide

NOTE: Wall plate is NOT included.

Important Information

These features are supported by all HomeSeer systems, including HS3 software and HomeTroller controllers. If you're using another brand of controller, be sure to check with that manufacturer to see if the central scene features are supported.

  • Part Number: HS-WS200+
  • Color: White. Almond color kit available (not included).
  • Protocol: U.S. Z-Wave Plus (908.42 MHz)
  • Power: 120 VAC, 60Hz
  • Max. Load:
    • Incandescent: 900 Watts
    • LED / CFL: 200 Watts
    • Motor: 1/2 HP
    • Resistive: 1800 Watts (15 Amps)
  • Features: Supports Z-Wave S2 security
  • Approvals: cUL, FCC, Z-Wave Plus certified