• Home
  • Juke Multi-Room Streaming Amplifier with Rack Mount

Juke Multi-Room Streaming Amplifier with Rack Mount

$1,368.00 to $1,518.00
SKU: JUKExRACK

Please Select Option To View Availability

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Product Description

The Juke Audio multi-room streaming amplifier is an all-in-one solution for powering and wirelessly controlling pre-wired architectural speakers across an entire home or building. The Juke Audio multi-room streaming amplifier can stream content from Wi-Fi enabled devices and wired analog inputs.

At the size of a textbook, the unit can drive up to either 12 speakers across 6 zones, or 16 speakers across 8 zones, The Juke Audio Amplifier supports up to 4 wired and wireless inputs simultaneously, and contains modern streaming technology for easy listening from phones/tablets across any combination of rooms over Wi-Fi.

  • Multi-room audio amplifier with built-in Wi-Fi and 2 USB ports for analog connections
  • Two USB Type-A ports for adding optional third-party adapters for Bluetooth and other analog input sources
  • Stream audio to any combination of zones simultaneously from up to four independent streaming inputs
  • Supported streaming sources include: Apple Music, Spotify, SoundCloud, Amazon Music, Pandora, podcast streaming services, YouTube, Spectrum TV, DirecTV, and more
  • Combine multiple Juke Audio Amplifiers into one larger system for larger audio installations
  • Efficient Class D amplifier outputs 20 watts per channel RMS (40 watts per zone)
  • Web interface for wireless music streaming and system control
  • Voice control compatible via wired connection to a dedicated smart assistant device

In The Box:

  • Juke Audio Amplifier
  • 71 inch Power cord (IEC 3-pin)
  • 5' Ethernet cable
  • 4 x 8-pin Euroblock connectors
  • 2 x Rack-mount plates
  • 4 x 3/8" machine-screws
  • Instructions

NOTE: An Internet connection is required for operation. Users must be connected to the same local network as the Juke Audio Amplifier to control zones. Android support, Bluetooth connection, and analog RCA connection requires the separate purchase of third-party adapters or software.

Tech Specs

  • Part Number:
    • JUKE-6-RACK: 6-Zone
    • JUKE-8-RACK: 8-Zone
  • UPC:
    • JUKE-6-RACK (6-Zone): 860003274514
    • JUKE-8-RACK (8-Zone): 860003274514
  • Device Class: Class-D Amplifier
  • Internal Computer:
    • Processor: Quad Core, 1.2 GHz
    • 1 GB of RAM
  • Firmware: FLASH based, Upgrades are provided OTA (over the air)
  • Network Connections:
    • Ethernet via an RJ-45 connector
    • Wi-Fi using WPA2 *
  • Internal Power Supply:
    • Voltage input range: 90 to 264 VAC, 127 to 370 VDC
    • Efficiency: up to 95% efficient
    • Surge withstand: 300 Vac for 5 seconds
  • External Power Requirement: 600W maximum
  • Amplifier Power Output:
    • 40W peak per channel (80 W peak per zone). RMS power: 20W per channel (40W per zone)
    • Aggregate output power of zones operated simultaneously: ~320W peak
  • Speaker Connections:
    • Speaker impedance: 2 Ohms to 8 Ohms
    • Multiple speakers can be connected in parallel as long as the effective impedance is greater than 2 Ohms (e.g. one zone could have 3 left speakers and 3 right speakers if each speaker is 8 Ohms)
    • Speaker wires:
      • Accepts 12 to 22 gauge wires
      • Stripping length: approximately 0.25 to 0.3"
      • Attach by tightening screws
      • 4 pluggable 8-position terminal blocks with 0.2" spacing
    • V(ESD) Electrostatic Discharge:
      • Human-body model (HBM), per AEC Q100–002: ±3000V
      • Charged-device model (CDM), per AEC Q100–011: ±500V
  • Protective Functions: Output current limiting, output short-circuit protection, over-temperature, undervoltage and over-voltage
  • Dimensions: 15" W x 8" D x 3" H
  • Weight: 6 lbs.
  • Maximum ambient temperature: 40 °C.
  • Standards and Certifications: UL 60950-1,TUV EN60950-1, CCC GB4943, EAC TP TC 004 approved, Flammability rating according to UL 94 V0
  • Warranty: 1 Year

NOTE: Wi-Fi using WPA2: Juke should be within 10 to 15 feet of an access point, otherwise we recommend using a TP-Link N300 and connecting Juke to its Ethernet port.