Linear Multi-Code Gate Receiver, 12-24V
Product Description
Product Description
The two receivers can operate from 12-30 volts AC or 10.5-30 volts DC and are normally powered from the gate operator. Their relay contact(s) are rated at 30 VAC/DC up to 5 Amps.
The two receivers both support transmitters that use the Multi-Code format (300 MHz ), as well as the Stanley compatible (310 MHz ) format. Both formats support 1,024 system codes for the MCS109950 and 512 system codes for the MC302850 (system codes are easy to set via dip switches).
The 1-Channel 12-24V Gate Receiver (MCS109950) has a single relay and replaces three different Multi-Code gate receivers, the MCS109930, the MCS109940, and the MCS109931. It is designed for use with automatic gate operators or systems where a remote antenna is needed.
The 2-Channel 12-24V Gate Receiver (MCS302850) comes with two relays and replaces Linear models MCS302801 and MCS203102, both of which were housed in metal enclosures.The MCS302850 comes in a plastic housing that is easy to work with. It will operate two gates, one gate and an obstacle sensor, or channel one can open the gate and channel two can close the gate. Both models come with a 9-inch local antenna, three feet of 75 ohm coaxial cable, and a bulkhead connector for locating the antenna outside the gate operator enclosure. These receivers also include audio test points for connecting audio listening equipment for troubleshooting.