Napco Adaptive Dual Microwave/PIR Detector, Pet Immune (100 lbs.)
Napco's Adaptive Dual Microwave/PIR Detectors continuously adjust to their environment, providing 100lb. (45.4kg) pet/animal immunity and ultimate reliability & false alarm protection.
Upon installation, a Napco Adaptive Microwave/PIR Detector powers up, initialized in the first of its 12 sensitivity modes, i.e., the most sensitive, enabling it to sample prevailing environmental conditions. Faced with hostility or tranquility, the Adaptive detector automatically selects the most appropriate detection mode accordingly, optimizing both intruder catch and stability. Each time the sensors detect a stimulus strong enough to generate a signal, but insufficient in strength to indicate an alarm, the detector will automatically change sensitivity modes, effectively widening the gap between the detected signal and its alarm threshold. Therefore, environmental disturbances, those that register by the PIR and/or microwave sensor, are better tolerated and the threat of false alarms or nuisance alarms is dramatically reduced, far surpassing the performance of conventional dual technology devices.
Napco Adaptive C200AP also includes P.E.T., profile enhanced targeting circuitry and Vari-Pet optics, to provide the ultimate pet/animal protection, for up to 100lb. (45.36kg) pet immunity! And, most-importantly, because a dynamic Adaptive Detector literally adjusts to its surroundings minute-by-minute, once the pet vacates or other nuisance disturbances abate, e.g., the space heater turns off again, the air conditioner stops blowing the blinds, power stops browning-out, – this intelligent detector again elevates its sensitivity, mode by mode–so the premises always enjoys the greatest level of fast intruder-catch detection and false alarm protection possible.
The most forgiving sensor to install available, Adaptive Sensors are so smart and make the sensitivity and critical range adjustments an experienced alarm professional would, if one were standing by, 24-hours a day, seven days a week to make them. Any activity beyond the unit's protected area, detected by the microwave section is also automatically compensated for. The unit even actively tests both its channels (PIR and Microwave), regularly activating each, to make sure it is on-the-job, performing to specification.