On-Q/Legrand 1-Port Digital Cable Amplifier with Coax Network Support
Product Description
The Single-Port RF Digital Cable Amplifier improves signal strength of video signal throughout the home. For use with MoCA, VoIP, and DOCSIS 3.0 networks.
- Amplify RF signal strength to support strong video signal throughout the system
- Strong 15dB RF video amp to improve signal throughout the house
- Ultra low noise, high definition video RF amplifier
- Compatible with existing and future networks such as MoCA, VoIP, and DOCSIS 3.0
- Coax networking adapters and splitters are not compatible with satellite television systems
Tech Specs
- Cable Type: Coaxial
- Color: Black
- Connection Type: ANSI/SCTE 01 Compliant Brass Sealed CamPort F-Connector
- Type: Signal Amplifier
- Housing Material: Nickel Plated
- Surge Protected: 6kV Combination Wave: IEEE C62.41-1991 Cat. B3 on all RF ports, including power adapter
- Compatible Power Supplies: 120V 60Hz Adapter, Part # 104157-01 (included)
- Frequency: 5 to 1002MHz
- mA: 200mA
- Ohm Value: 75 Ohm Nominal impedance
- Operating Temperature: -40 to 140 degrees F (-40 to 60 degrees C)
- Power Requirements: 12VDC, 200mA
- Typical Insertion Loss: less than 1.2 dB
- Typical Return Loss: more than 20 dB
- Volts: 12VDC
- Diameter: 2.3(H) x 3.5(W) x 0.8(D) inches (5.8 x 8.9 x 2 cm)