PCS PulseWorx UPB Powerline Interface Powerpack
Product Description
The PCS Powerline Interface Powerpack is a UPB powerline interface module and a power supply designed to deliver power and the UPB signals to the PCS PulseWorx TouchScreen Timer (PCTST), or any RS232 compatible device, to command UPB connected lights and appliances over existing power lines. The PIP plugs into standard outlets and connects a CAT-5 cable (up to 50' long) between it and the TouchScreen Timer. UPStart Setup software will allow the PIP to be added to any UPB network as well as perform communication testing or adjust its receive sensitivity in noisy environments.
FEATURES:
- Improved Communication – PowerPulse Dual-Transmitter circuitry 50% more transmitting power
- Developer Friendly – PIP-TS offers UPB communication interface and 12VDC in one unit
- Improved Communication – PowerPulse Dual-Transmitter circuitry 50% more transmitting power
- Simply plug into an electrical outlet
- Adjustable Receive Sensitivity -If powerline noise is severe the sensitivity can be adjusted to filter out most noise
Tech Specs
- Part Number: PIP
- Power Requirements: 120 Volts AC, 50/60Hz
- Environmental Conditions: Indoor Use Only
- Temperature: -40° to 104°F (-40° to 40°C)
- Humidity: 10% to 90% RH (non-condensing)
- Certifications: UL, CSA C22.2
- Status LED Modes: All programmable with UPStart On, Opposite, Off, N/C
- Retains all settings in Non-volatile EERPOM during Power outage
- Set-Up Mode: Press the setup button 5 times, the LED blinks
- Dimensions: Height: 4.00 in Width: 2.00 in Depth: 1.25 in
- Weight: 8.0 oz
- Warranty: 5 Years