PCS PulseWorx UPB Powerline Interface Module (PIM)
Product Description
The PulseWorx UPB Powerline Interface Module (PIM) transmits and receives UPB messages from a computer to connected plug-in devices through either direct RS232 or USB connections. The PIM is the device of choice for directly interfacing PCS's UPStart Setup Software through your powerlines. The module includes a pass-through outlet to plug-in devices you do not want to include into your UPB network.
The PIM plugs into any standard 120VAC electrical outlet and comes in two versions: one with RS232 serial connection (PIM-R) and one with a USB connection (PIM-U). A multi-color LED is provided on the front of the module and acts as a powerline signal indicator as well as indicating modes of operation.
FEATURES:
- Plug-in module features standard outlet and designated connection interface
- 'Always on' pass-through outlet provides traditional, continuous power
- Multicolor LED indicates UPB powerline signal and modes of operation
- Two Modes of Operation – Message mode or Pulse mode
- Message Mode confirms when a UPB message is successfully received
- Pulse Mode indicates every UPB command that is transmitted or received
Tech Specs
- Part Number:
- PIM-R: RS232
- PIM-U: USB
- Power Requirements: Primary: 120 Volts AC, 50/60Hz
- Environmental Conditions: Indoor Use Only
- Temperature: -40 to 104 degrees F (-40 to 40 degrees C)
- Humidity: 10 to 90 percent RH (non-condensing)
- Certifications: Safety tested for USA and Canada to ETL tested to UL508 UL-508-2010 CSA C22.2 #14-2010
- Status LED Modes: All programmable with UPStart On, Opposite, Off, N/C
- During Power Outage: Retains all settings in Non-volatile EERPOM
- Set-Up Mode: Press the setup button 5 times, the LED blinks
- Dimensions: 3(H) x 2(W) x 1.25(D) inches
- Weight: 5 ounces
- Warranty: 5 Years