Skip to main content
  • Home
  • PCS PulseWorx UPB Wired-In Split Phase Repeater

PCS PulseWorx UPB Wired-In Split Phase Repeater

$265.83
SKU: PCSPR1

IN STOCK! Ships same business day if ordered before 3pm PT

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Product Description

The SPR-1 Split-Phase Repeater is a small wired-in device designed to repeat UPB signals between devices across great distances in large buildings. The device is an optimal choice to be installed in homes or businesses typically 5000 sq. ft. or larger.

The main purpose of the Split-Phase Repeater is to help reliably deliver UPB signals from controllers to receivers. It is recommended to be installed at the main electrical panel on installations with 3 or more panels. When used with UPStart the Split-Phase Repeater will test and confirm signal strength to each and every device in your system.

Features:

  • Repeats GEN II UPB communication signals at full strength between phases
  • Made of nonconductive plastic
  • Mounts in a single gang electrical box or inserted through a 1/2" knockout with the wiring nipple
  • Designed to be used in larger residential 120/240VAC split-phase electrical environments

Tech Specs

  • Part Number: SPR-1
  • Warranty: 5 Years
  • US Patent No.: 6,734,784; 6,784,790; 7,265,654; 7,688,183. U.S. and foreign patents may be pending.

Electrical

  • Power Requirements: 120V/240V AC 50Hz/60Hz
  • Connections/Power Wire:
    • Three 16 AWG gauge; 105°C insulation
    • Black: Line 1
    • Red: Line 2
    • White: Neutral
  • Standby Power Consumption: 0.8 Watts
  • Environmental Conditions: Indoor Use Only or water-proof enclosure next to circuit breaker panel
  • Operating Temperature: -40° to 194°F (-40° to 90°C)
  • Operating Humidity: 10 to 90 percent RH (non-condensing)
  • Certifications: Safety tested for USA and Canada to ETL tested to UL508 UL-508-2010 CSA C22.2 #14-2010

Operation

  • Setup Mode: Tap program button 5 times
  • Status LED Modes:
    • RED: Transmitting a signal
    • MAGENTA: Receiving a signal
    • BLUE: Normal Mode Power Applied
  • LED Indicators: Red /Blue LED
  • During Power Outage: Retains all settings in Non Volatile EERPOM

Mechanical

  • Set Button Type: Button
  • Mounting: Single Gang Standard J Box or 1/2" Knockout
  • Dimensions: 2.75(H) x 2.25(W) x 1.50(D) inches
  • Weight: 5 ounces