PCS PulseWorx UPB Telephone Control Module
Product Description
The TCM Telephone Ring Interface Module is a small plug-in device designed to send UPB commands to connected lights when a telephone rings. This plug-in module sends a UPB link command to turn on or off (or blink) any light or group of lights upon the ringing of a telephone.
The module plugs into any standard wall outlet and connects to one or more telephone lines. It provides two independent channels of ring sensing inputs to activate lights, trigger preprogrammed scenes, or send messages to a central controller.
Like all PulseWorx devices, the TCM can be initially configured using PCS's free UPStart Setup Software tool. UPStart allows for customization of Network, Room, and Device names, default on light levels, dim/brighten rates, LED colors, and more. UPStart has the option to configure an entire network off-line and then download the information into the devices after they are installed in the home.
Tech Specs
- Part Number: TCM
- Power Requirements: Primary: 120 Volts AC, 50/60Hz
- Transmission Channels: 2 Links/Scenes
- Connections/Power Wire: Power outlet plug-in
- Standby Power Consumption: 0.8 Watts
- Environmental Conditions: Indoor Use Only
- Temperature: -40° to 104°F (-40° to 40°C)
- Humidity: 10% to 90% RH (non-condensing)
- Certifications: Safety tested for USA and Canada to ETL tested to UL508, UL-508-2010 CSA C22.2 #14-2010
- LED Indicators: One per button; LED reflects status of Group
- IR Receiver: No
- During Power Outage: Retains all settings in Non-volatile EERPOM
- Set-Up Mode: Press setup button 5 times
- Mounting: Outlet plug-in
- Dimensions: Height: 3.00 in Width: 2.00 in Depth: 1.25 in
- Weight: 5.0 oz.
- Warranty: 5 Years