PCS PulseWorx UPB Wall Controller, Load Relay, 8A, 8 Button
Product Description
The PCS PulseWorx UPB Keypad with Load Relay combines the capabilities of a PCS UPB Keypad Controller with a single On/Off Load Relay rated up to 8A. The relay can control fluorescent lights or a motor load with On or Off commands.
The UPB Keypad can store up to 16 commands or scenes and control six different devices. Program different commands when a button is tapped, double-tapped, held or released to trigger specific lights or devices, a single room, or your whole house. Lights will dim or brighten at a rate from 0.8 seconds to 1 hour. The switch is pre-programmed to control 8 preset automation scenes right out of the box. The ON/OFF buttons are also preset to control their own lighting load out of the box.
The KPLR is available in seven different colors: white, almond, light almond, ivory, brown, gray, and black to match practically any décor.
FEATURES:
- Controls other UPB keypad controllers, outlets, dimmers or wall switches
- Controls single lights, trigger scenes, and send messages to a central UPB controller
- Simple ON/OFF relay function of its own load (up to 8A rating)
- Choose from 16 function modes for each button to provide direct load control, other single devices or scenes
- Adjustable backlit buttons to help locate in the dark
- Pre-programmed with upto 8 preset scenes
- Fits in a single gang location
Tech Specs
- Part Number:
- KPLR-8-AL: Almond
- KPLR-8-B: Black
- KPLR-8-BR: Brown
- KPLR-8-G: Gray
- KPLR-8-I: Ivory
- KPLR-8-LA: Light Almond
- KPLR-8-W: White
- Power Requirements: Primary: 120 Volts AC, 50/60Hz
- Transmission Channels: 8 Links/Scenes
- Connections/Power Wire: Two 16 AWG gauge 105 C insulation. Black – Hot/Line. White – Neutral. Red – Load
- Relay Max. Load: 8.0A
- Standby Power Consumption: 0.8 Watts
- Environmental Conditions: Indoor Use Only
- Temperature: -40 to 104° F
- Humidity: 10 to 90 percent RH (non-condensing)
- Certifications: Safety tested for USA and Canada to ETL tested to UL508; UL-508-2010 CSA C22.2 #14-2010
Operation
- Status LED Modes: All programmable with UPStart On, Opposite, Off, N/C
- LED Indicators: One per button; LED reflects status of Group
- IR Receiver: Yes
- During Power Outage: Retains all settings in Non-volatile EERPOM
- Setup Mode: Press and Hold ON/OFF Button for 3 Seconds- All LEDs will Flash
Mechanical
- Button Type: 6 mechanical latching contact type buttons, 2 Momentary contact type buttons
- Wire Nuts: 2 included
- Mounting: Single Gang or multiple-ganged junction box
- Dimensions: 4.1(H) x 1.7(W) x 1.8(D) inches
- Weight: 5.6 ounces
- Warranty: 5 Years
- US Patent No.: 6,734,784; 6,784,790; 7,265,654; 7,688,183. U.S. and foreign patents may be pending.