PCS SimpleWorx Plug-In Module Relay, 15A
Product Description
The Plug-in Module Relay AC is a remote device for controlling plug loads, such as lamps up to 800Watts and appliances up to a 15A load without the need for control wires from a SimpleWorx transmitter. PMR Modules will also control landscape transformers, water features, televisions, irrigation equipment, small motors, pumps and just about anything that can plug-in.
Set-up is accomplished by pushing a button for 6 seconds on each device, within 20 seconds they are Linked.
One, two, three you're done!
- Simple installation, just plug it in to any grounded 120V outlet
- Controllable from one Transmitter; no control wiring
- 15 Amps of ON/OFF control.
- Links to SPC Transmitters in seconds
- LED indicates status of relay
- Power failure restore to last state
Tech Specs
Power Requirements
- Primary: 120 Volts AC, 50/60Hz
- Channels: 1
- Switch Load Types: Standard inductive loads up to 15A and incandescent loads up to 800W
- Relay Lifetime: 100,000 on/off operations at full electronic ballast load
- Max Load: 15 Amps at 120V AC 50/60 Hz
- Standby Power Consumption:< 0.8 Watts
- During Power outage: Retains all settings in Non-volatile EERPOM
Environmental Conditions
- Temperature: -40 to 194 degrees F (-40 to 90 degrees C)
- Humidity: 10 to 90 percent RH (non-condensing)
- Certifications: Safety tested for USA and Canada to ETL tested to UL508
- UL-508-2010 CSA C22.2 #14-2010
- Indoor Use Only
Mechanical
- Set Button: Button
- Wire Nuts: 4 included
- Mounting: Plug-in to a Standard 120V Grounded outlet
- Dimensions: 3(L) x 2(W) x 1.55(D) inches
- Weight: 0.3 pounds
- US Patent No.: 6,734,784; 6,784,790; 7,265,654; 7,688,183. U.S. and foreign patents may be pending.