PCS SimpleWorx Plug-In Receiver Module, Contact Closure Input
Product Description
The Plug-in Module Receiver is a remote device for controlling devices that need a dry contact input. It will control such devices as shades, blinds, gate motors, garage door openers, pool or irrigation valves, electronic door strike, motorized screens etc, up to a 8A load without the need for control wires from a SimpleWorx transmitter.
- One Channel relay to control a variety of devices
- Simple installation, just plug it in to any grounded 120V outlet
- Links to SPC Transmitters in seconds.
- Controllable from one Transmitter; no control wiring
- 8A Max AC or DC of open or closed control.
- LED indicates status of relay
- Power failure restore to last state
Tech Specs
ELECTRICAL
- Power Requirements: Primary: 120 Volts AC, 50/60Hz
- Channels: 1
- Switch Load Types: Contact Closure
- Relay Lifetime: 100,000 on/off operations at full electronic ballast load
- Max Load: 8 Amps at 120V AC 50/60 Hz
- Standby Power Consumption:< 0.8 Watts
- Environmental Conditions: Indoor Use Only
- Temperature: -40 to 194 degrees F (-40 to 90 degrees C)
- Humidity: 10 to 90 percent RH (non-condensing)
- Certifications: Safety tested for USA and Canada to ETL tested to UL508 UL-508-2010 CSA C22.2 #14-2010
OPERATION
- Status LED:
- Blinking Green = Link Mode
- Red = Power applied
- Blinking Red = Transmitting
- Channel LED: Red when on
- During Power outage: Retains all settings in Non-volatile EERPOM
MECHANICAL
- Terminals: (28 -16 gauge wire)
- Connections: Wago #253 Series or equivalent 4-position connector terminal block
- Set Button: Button
- Mounting: 3-pin grounded plug
- Dimensions: 3(L) x 2(W) x 1.55(D) inches
- Weight: 0.3 pounds
- US Patent No.: 6,734,784; 6,784,790; 7,265,654; 7,688,183. U.S. and foreign patents may be pending.