Qolsys IQ Medical Pendant
Product Description
The IQ Fall Pendant is designed for a user to push the button for help in case of an accidental fall or for any other occasion when assistance is needed. It can also automatically activate an emergency alarm if it detects a fall in the event that the user is unable to trigger the alarm by pressing the button.
In The Box:
- Fall Pendant
- Lanyard
- Manual
NOTES: Requires connection to a compatible control panel/receiver (319.5 MHz wireless frequency), such as a GE/Interlogix Panel (NetworX, Simon, etc.), Qolsys IQ Panel, Leviton 64-Zone Receiver for GE/Interlogix, Elk M1 Wireless Receiver for GE/Interlogix Crystal Transmitters, or other legacy 319.5 MHz system (all sold separately). Fall sensors do not detect 100% of falls. Users should always press the button if you need help. Do not activate the fall sensor twice within a 10-second interval.
Tech Specs
- Part Number: QS1314-840
- Button Function: Press = Activate, Release = Restore
- Supervisory Signals: Sent every hour
- Transmitter frequency: 319.5 MHz
- Water Resistant: Rated IP45, protected from low pressure water jets in any direction
- Battery: 3V CR2477 (x1). Typical battery life of 2 years with an average of one activation per day
- Dimensions: 1.67(W) x .75(D) x 2.32(H) inches
- LED Battery Indicators:
- LED Off: Standby Mode
- 3 Red Flashes: Powering On
- 1 Green Flash: Transmitting with Good Battery
- 1 Red Flash: Transmitting with Low Battery