Qolsys IQ Wireless Temperature Sensor
Product Description
The Qolsys IQ Temp warns of severe temperature changes and detects high (~100 degrees F) or low (~40 degrees F) temperatures depending on the user's desired monitoring (i.e. freezing pipes or home comfort). Perfect as an early warning for HVAC system failure, it can help prevent harm to the elderly or infirm and pets, as well as costly damage due to freezing temperatures or excessive heat over long periods of time. Homeowners are alerted to the danger via text message and on-screen notifications on the IQ Panel. The IQ Temp uses a new antenna design enabling better performance on a variety of surfaces, including metal doors, and has a 8-10 year battery life. The IQ Temp is designed to alert you if temperatures drop below 40°F or rise above 100°F. This early warning may help you protect your valuables, pets and home from extreme heat or cold in the event of a HVAC or thermostat failure by sending an alert to your IQ Panel. You can also configure text message notifications to keep you informed when you are away from home.
Features:
- Freeze detection alerts panel is temp drops below 40°F
- High temp sensor alerts panel if temperature exceeds 100°F
- Great to detect HVAC failure
- Protect elderly, infirm, and pets.
- Get a text notification sent to your phone if the IQ Temp detects a potential problem (Alarm.com account required)
- Cover tamper
- Unique ID for each function
- Temperature check every 5 minutes
- Battery checked every hour
In The Box:
- Sensor
- Batteries
- Adhesive
- Instructions
NOTE: Connects to required control panel/receiver operating on wireless 319.5 MHz frequency. Compatible wireless options include: GE/Interlogix Panel (NetworX, Simon, etc.), Qolsys IQ Panel, Leviton 64-Zone Receiver for GE/Interlogix, Elk M1 Wireless Receiver for GE/Interlogix Crystal Transmitters, or other legacy 319.5 MHz system (not included). Avoid areas that may retain heat, such as furnace rooms or near hot water pipes.
Tech Specs
Compatible 319.5 MHz Wireless Panels/Receivers*
- GE/Interlogix Panel (NetworX, Simon, etc.)
- Qolsys IQ Panel (Version 1 or 2)
- Leviton 64-Zone Receiver for GE/Interlogix (part 42A00-2)
- Elk M1 Wireless Receiver for GE/Interlogix Crystal Transmitters (part ELK-M1XRFEG)
*Panels and receivers are sold separately.
Technical Details
- Part Number: QS5515-840
- Battery: 3V Lithium (x2) included
- Battery Life: 8-10 years
- Transmitter Frequency: 319.5 MHz
- Wireless Signal Range: 600 feet (200 m), open air.
- Code Outputs: tamper, tamper restore, alarm, alarm restore, low battery. Unique code ID.
- Approvals: FCC, IC
- Warranty: 1-Year Limited