Qubino Z-Wave Plus Flush Shutter DC, Gen5
Product Description
The Qubino Flush Shutter DC controls 12–24V DC motors of blinds, rollers, shades, venetian blinds and similar sunscreens. It can be paired with a digital temperature sensor (sold separately) to program automated scenes and control devices when a set temperature is reached. Precise positioning is supported for motors equipped with mechanical or electronic end limit switches. The Qubino Flush Shutter DC also acts as a Z-Wave repeater to improve the range and stability of the Z-Wave network. The Flush Shutter DC can be used in many different scenes, which can help make your life more comfortable.
Features:
- Support venetian blind slats tilting.
- Protection against accidental short circuit on outputs.
- Protection against wrong power supply connection.
- Over temperature protection.
- Specially designed casing ensure the most simplified installation (ease of cabling fixing) inside a flush mounting box.
- Extremely low energy consumption: cca. 0.3 W.
- Extended operating temperatures: (-10 to 40) °C.
- Support for precise positioning.
- Support for the connection of digital temperature sensor.
- Power consumption measurement.
In The Box:
- Flush Shutter DC
- Instruction Manual
NOTE: Remote commands using Z-Wave requires a Z-Wave network controller (sold separately).
Tech Specs
- Part Number: ZMNHOD3
- Power Input: 12 to 24 VDC ±10%
- Rated load current: 2A
- Overcorrect protection: 5A
- Output circuit power of DC output (resistive load): 48 W (24 VDC)
- Power measurement accuracy: ± 5%
- Temperature range: -25°C to 80°C (-13 to 176°F) (sensor must be ordered separately)
- Operating Temperature: -10° to 40°C (14 to 104°F)
- Operating Distance: up to 30 m indoors (98 ft)
- Dimensions: 41.8 W x 36.8 H x 15.4 D mm (1.65 W x1.45 H x 0.66 D in)
- Weight: 28 g (0.98oz)
- Electricity consumption: 0.4W
- For installation in boxes: Ø ≥ 60 mm (2.36 in) or 2M, depth ≥ 60 mm (2.36 in)
- Switching: H bridge
- Z-Wave Repeater: Yes
- Warranty: 2 Years