Seco-Larm Enforcer 4K Enhanced HDMI Long Range Extender Over Single Cat5e/6

The Seco-Larm Enforcer 4K Enhanced HDMI Long Range Extender is able to extend HDMI 1080p up to 492ft (150m) and 4K2K up to 394ft (120m) over a single Cat5e/6 cable. It features plug and play operation, an HDMI loop out, Bi-directional IR and RS-232 connections, and CEC pass-through capabilities. It also supports HDF, HDR10+, Dolby Vision, HLG, and 18Gbps video bandwidth.

• Extends HDMI signals: 1080p up to 492ft (150m) and 4K2K up to 394ft (120m)
• Supports resolutions from 480i to 4K2K/UHD and 18Gbps video bandwidth
• HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
• Analog stereo output on receiver
• Bi-directional IR, RS-232, and CEC pass-through
• Supports HDF, HDR10+, Dolby Vision, and HLG
• Includes one 24VDC power supply – set can be powered at either the transmitter or receiver

Why You Would Use This Product:

The Seco-Larm Enforcer 4K Enhanced HDMI Long Range Extender Over Single Cat5e/6 is ideal in situations where the need to extend the range of HDMI signals is necessary. For example during a conference where video from a laptop that's around 300 feet away (in the back of an auditorium) needs to be shown on a large screen that's located at the opposite end. And because this long range extender supports resolutions up to 4K2K/UHD, you'll be able to transmit the best video and audio quality with zero signal loss.

In The Box:

• Transmitter
• Receiver
• IR Transmitter
• IR Receiver
• 24V Power Adapter
• 4 x IR Mounting Clips
• 2 x 3-Pin Phoenix Connector
• Manual

Notes:

• Make sure the maximum lengths are not exceeded for either the HDMI or Cat5e/6 cable used.
• Only one power supply is used, either on the transmitter or receiver.
• For professional installation only.