Seco-Larm Enforcer Annual Timer Module

The ENFORCER SA-027HQ Annual Timer can be programmed to operate two relays 24 hours a day, over the course of an entire year. These relays can be used to control devices in many applications such as security, access control, lighting, and environmental control. The two Form C relays can each be programmed to operate in shunt or momentary mode for up to 50 unique events. Each event can be programmed on a weekly or daily schedule. Block programming allows events to be repeated on consecutive days. 20 Programmable holidays disable the timer for a single day, or for the same day every year.

• Two N.O. or N.C. Form C relays 10A@24VAC / 24VDC.
• Each relay can be programmed for 99 events, for a total of 198 individual programmable events.
• Events can be set weekly, daily, or hourly, over the course of an entire year.
• Manual operation of relays without event programming.
• One egress input per relay (2 total).
• Block programming allows events to be repeated.
• First-person-in function interrupts the timer's normal operation.
• Event outputs can be programmed disable, ON, OFF, shunt, or momentary (1~99 seconds).
• 20 Programmable holidays.
• Password-protected programming.
• Tandem mode allows both relays to operate simultaneously.
• EEPROM Memory for data protection in case of power failure.
• Built-in clock backup battery.
• Built-in backup battery charger for external backup battery use.
• Compensates for leap years.
• Can be set for Standard or Daylight Saving Time.
• Alphanumeric backlit LCD display for easy programming.

In The Box:

• 1 x 365-Day Timer
• 2 x Screws
• 2 x Backup battery wires
• 1 x Manual

NOTE: Power supply and backup battery not included.